وظائف مهندس تصميم ميكانيكي في الكويت

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul> <h4>Compensation details</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Would you like the opportunity to collaborate on a wide range of technical products?</p><br><p>Do you enjoy creating innovative and strategic solutions to solve complex problems?</p><br><p><b>Join our cutting-edge Drilling Services team</b></p><br><p>At Baker Hughes our purpose is clear. We take energy forward making it safer, cleaner and more efficient for people and the planet. Our team partners with the business to effectively enable and sustain change to improve our performance.</p><br><p><b>Partner with the best</b></p><br><p>As an Electro-Mechanic Master / General, you will troubleshoot, test, assemble, disassemble and perform the visual inspection of mechanical assemblies. Whilst assisting in repairing and modifying non-conforming equipment, you will perform all test with minimal instruction.</p><br><p>As an Electro-Mechanic Master, you will be responsible for:</p><br><ul><li>Reviewing procedures for assembly, disassembly, and test verification accuracy Configuring test stations and systems</li><li>Analysing and interpreting data from environmental tests, and troubleshooting equipment problems</li><li>Assisting in the set-up of experiments and the recordings of experimental data in collaboration with Engineering and Reliability groups</li><li>Testing and evaluating the performance and, if required, repairing general purpose test equipment</li><li>Performing quality assurance activities required by manufacturing or engineering specifications and ISO requirements to ensure compliance.</li><li>Working in compliance with HS&amp;E policies and procedures</li></ul><p><b>Fuel your passion</b></p><br><p>To be successful in this role you will:</p><br><ul><li>Have a 3-year technical diploma or associate degree in the electrical/Mechanical field or higher</li><li>Have at least 5 - 10 years of related experience in electro-mechanical function in oil and Gas industry/domain</li><li>High level of knowledge in the maintenance of electronics</li><li>Have advanced skills in soldering and assembling of electro-mechanical devices</li><li>Have the ability to read and interpret blueprints, wiring diagrams, assembly prints and parts lists</li><li>Demonstrate the ability to identify problems and be able to develop solutions</li><li>Have previous experience with Baker Hughes (preferred)</li><li>Display an advanced mechanical aptitude and experience with general hand tools and precision measuring equipment.</li></ul><p><b>Work in a way that works for you</b></p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; This role is a shift-based working pattern.</p><br><p><b>Working with us</b></p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.</p><br><p><b>Working for you</b></p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><br><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits</li></ul><p>LI_Onsite</p><br>The Baker Hughes internal title for this role is: ARMO Mechanic Master </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a highly skilled Senior Mechanical Engineer to join our dynamic team in the accounting sector. This role is pivotal in ensuring the seamless integration of mechanical systems within our operational framework, contributing to our goal of delivering top-notch services. As a Senior Mechanical Engineer, you will leverage your expertise to design, analyze, and improve mechanical systems that support our business objectives. This is not just a job; it’s an opportunity to make a significant impact in a collaborative environment where innovation is encouraged and valued.</p><p>In this position, you will have the chance to lead projects that drive efficiency and effectiveness across various departments. You will work closely with cross-functional teams to implement advanced mechanical solutions that enhance our service delivery and operational capabilities. We believe in fostering a culture of continuous learning, and as a Senior Mechanical Engineer, you will have access to training programs and professional development opportunities that will help you grow your skills and advance your career.</p><p>Your leadership will be crucial in mentoring junior engineers, guiding them through complex projects, and sharing your knowledge to cultivate a strong engineering team. This role offers the chance to influence the strategic direction of our mechanical engineering initiatives, ensuring that our practices align with industry standards and best practices. Join us, and be part of a forward-thinking organization that values your contributions and invests in your future.</p><p><b>Responsibilities:</b></p><ol><li>Lead the design and analysis of mechanical systems, utilizing CAD software and simulation tools to ensure optimal performance and compliance with industry standards.</li><li>Collaborate with cross-functional teams to integrate mechanical systems into existing processes, ensuring seamless operation and efficiency in service delivery.</li><li>Conduct regular assessments and maintenance of mechanical systems, implementing improvements based on performance data to enhance reliability and reduce downtime.</li><li>Mentor junior engineers and provide guidance on best practices in mechanical engineering, fostering a culture of learning and professional growth within the team.</li><li>Prepare detailed project documentation, including design specifications, reports, and presentations, to communicate project progress and outcomes to stakeholders effectively.</li><li>Stay updated on the latest mechanical engineering trends and technologies, applying this knowledge to drive innovation and improve existing systems.</li><li>Manage project timelines and budgets, ensuring that all engineering projects are completed on schedule and within financial constraints.</li><li>Evaluate and select appropriate materials and components for mechanical systems, considering factors such as cost, durability, and environmental impact.</li><li>Participate in safety assessments and ensure that all mechanical systems comply with health and safety regulations, promoting a safe working environment for all employees.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficiency in CAD software and mechanical design tools, enabling effective system modeling and analysis.</li><li>Strong analytical skills to assess mechanical systems and identify areas for improvement.</li><li>Excellent project management abilities to oversee engineering projects from conception to completion.</li><li>Leadership and mentoring skills to guide junior engineers and foster team collaboration.</li><li>Knowledge of industry regulations and standards to ensure compliance in engineering practices.</li><li>Effective communication skills for presenting complex technical information to non-technical stakeholders.</li><li>Adaptability to new technologies and methodologies, ensuring the continuous improvement of engineering processes.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Quality Assurance Engineer is responsible for validating and verifying software products and components to ensure end-users' workflow can be efficiently performed without software failures. The Quality Assurance Engineer works closely with engineering and portfolio managers to design and execute quality tests, report results for assigned software products. This person reviews the results of automatic tests with the Quality Assurance Automation Engineer during the software development cycle. Design, organize and execute test strategies, plans and suites in cooperation with the development team. Design and conduct nonfunctional tests including tests for system load and performance, security, scalability, usability and deployability. Review test plans to ensure completeness. Track testing progress. Analyze and prioritize technical problems. Identify and escalate project risks. Verify the correct fix of reported defects. Review results of automatic tests with the Quality Assurance Automation Engineer. Document, review and edit user documentation. Comply with the Software Lifecycle Management and Product Development process. Review software requirements documents. Provide input to improve product effectiveness, integration and usability. Utilize and promote the software development standards and testing and evaluation techniques defined by the Schlumberger software development organization, and contribute to their improvement. Document and report test results in a timely manner using established systems for reporting and defect tracking. Develop automated tests to support efficient regression testing, as well as scripts and software for testing.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<p>Burgan Drilling Company is expanding its operations and is seeking experienced and motivated professionals to join our drilling teams. We are currently recruiting for the following positions:</p><p><strong>Senior Drilling Crew:</strong></p><ul><li>Rig Manager/ Sr. Tool Pusher</li><li>Night Tool Pusher</li><li>Driller</li><li>Assistant Driller</li><li>Chief Electrician</li><li>Chief Mechanic</li><li>Safety Officer</li></ul><p><strong>Junior Drilling Crew:</strong></p><ul><li>Derrickman</li><li>Floorman</li><li>Assistant Electrician</li><li>Assistant Mechanic</li></ul><p>Minimum Requirements:</p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul><p>Interested candidates are invited to submit their updated CV, clearly indicating the position applied for with total years of drilling experience, rig types worked on, current location, availability with IWCF/Well Sharp Validity details.</p><p>Note: Only shortlisted candidates who meet the required qualifications and experience will be contacted.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Requirements:</b></p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead Design Engineer I - Mechanical for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary objectives</h4> <p>To ensure mechanical equipment design integrity whilst leading the mechanical equipment engineering group on specific projects.<br> To provide specialist rotating equipment input to conceptual studies, FEEDs and detailed design for oil and gas developments.</p> <h4>Responsibilities</h4> <ul> <li>Ensure that design is fully compliant with project specification and client, international and local standards.</li> <li>Preparation of specifications for, and evaluation of, rotating equipment packages.</li> <li>Perform engineering design as required.</li> <li>Duties will include conceptual design and specification of rotating and packaged equipment and review of EPC’s detailed designs, technical bid evaluation and vendor documentation.</li> <li>Allocate work to team members. Ensure that within assigned team, personnel work within their competencies and with appropriate supervision.</li> <li>Quality assurance – responsible for working within the provisions and guidelines of the quality assurance system.</li> <li>Safety – responsible for personal safety and safe working practices. Understand and follow OH&S procedures.</li> <li>Ensure that conceptual and detail design work is appropriate for the complexity of the construction tasks and achieving a good balance between design costs and implementation costs.</li> <li>Evidence of feedback from supervisors and/or superintendents that constructability issues are addressed adequately in design and that work packs contain sufficient detail with no unnecessary content.</li> <li>Conduct site investigations, prepare reports.</li> </ul> <h4>Mandatory requirements</h4> <ul> <li>Engineering degree in a relevant discipline</li> <li>15 years of total post graduation experience</li> <li>10 years mechanical design experience in the oil and gas environment</li> <li>5 years in the stated designation</li> <li>A minimum of 3 years in automation software</li> </ul> <h4>Essential skills / experience</h4> <ul> <li>Hands on experience with large gas turbine driven compressors, pumps, generators packages is mandatory. Experience of other packaged equipment is desirable.</li> <li>Experience with the development of layouts for new facilities</li> <li>Experienced in the specification for, evaluation of and documentation for rotating equipment packages in a PMC environment would be advantageous.</li> <li>Ability to work in accordance with broad technical guidelines and with minimal supervision.</li> <li>Ability to work on multiple assignments to tight deadlines and prioritization of work to achieve them.</li> </ul> <p><strong>Decarbonization – Energy Transition – Sustainability</strong></p> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</li> <li>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</li> <li>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</li> <li>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview</b><br>With over 17,000 employees worldwide, the Microsoft Customer Experience &amp; Success (CE&amp;S) organization is responsible for the strategy, design, and implementation of Microsoft's end-to-end customer experience. Come join CE&amp;S and help us build a future where customers come to us not only because we provide industry-leading products and services, but also because we provide a differentiated and connected customer experience.<br>We are looking for a highly motivated and passionate&nbsp;<strong>Data Security Cloud Solution Architect (CSA)</strong>&nbsp;to drive our customer's security transformation on the&nbsp;Microsoft 365 Platforms. This is a customer-facing role, owning the security-focused technical relationship and strategy between the customer and Microsoft as well customer engagements, including architecture, implementation, and operational health.<br>The ideal candidate will have&nbsp;<strong>hands-on project delivery experience</strong>&nbsp;in customer-facing roles and success in leading in-depth&nbsp;<strong>technical data security architecture discussions</strong>&nbsp;with senior customer executives, Enterprise Security Architects, Enterprise Architects, IT Management, and Developers to Secure our customer's technology estate and drive Security as an enabler for Microsoft security solutions.&nbsp;<br><br><br><b>Responsibilities</b><br><strong>Trusted Advisor</strong>&nbsp;- Empower customers in their Microsoft Security adoption journey, being hands on with them to envision and define a Secure strategy, Architecture, and implementation of necessary security controls aligned with Microsoft 365 Azure Data Security workloads while ensuring operational health.<br><strong>Security Services Acquisition and Expansion&nbsp;</strong>- Position and deliver solutions that drive Data Security products usage with a focus on Microsoft Purview. Collaborate with Azure Infrastructure, Data, Apps teams to expand Security of cloud migration and AI projects.&nbsp;<br><strong>Understand Customer/Partner Technical Environment</strong>&nbsp;- Accelerate Business Value of overall Security adoption by improving security posture and ensuring that the solution exhibits "Secure by Design" and Zero Trust framework.&nbsp;<br><strong>Architecture Design and Deployment</strong>&nbsp;- Run Architectural Design Session to build a plan for implementing the data security solution — governing design in line with customer business goals and their technical environment. Outcome is consensus on solution design and next steps toward production<br><strong>Practice Development</strong>&nbsp;- Collaborate and orchestrate with other Cloud Solution Architects and Microsoft stakeholders including FastTrack, partner, and Microsoft Services in developing complex end-to-end Enterprise solutions with the Microsoft Security platform<br><strong>Voice of the Customer</strong>- Be a Voice of Customer to share insights and best practices, connect with Global Security teams at Microsoft, Engineering and Product teams to remove blockers and influence the solution roadmap.<br><br><b>Qualifications</b><br>Bachelor's Degree in Computer Science, Information Technology, Engineering, Business,<br>Cybersecurity, or related field 5+ years experience in data security technologies, cybersecurity, information technology (IT) consulting/support, systems administration, network operations, software development/support, technology solutions, practice development, architecture, and/or consulting OR equivalent experience.<br>Candidates should have broad experience in security and expertise around related technologies and concepts such as Zero Trust , threat management,<strong>&nbsp;AI Security,&nbsp;Data Security&nbsp;</strong>and Extended Detection &amp; Response (XDR) and Identity. Candidates should have knowledge as a data security engineer or consultant to understand industry trends and competitive landscape, advise customers on ways to strengthen their security posture or health, and land customer value through security.<br>The technical aptitude and experience to learn new cloud security technologies and understand relevant cloud security market trends.<br>Knowledge of cloud security platforms and competitors. Breadth of technical security experience and knowledge, with depth / Subject Matter Expertise in following security solutions:<br><ul><li><strong>Data Security - Microsoft Purview (hands on project delivery experience required) -&nbsp;</strong>Data Protection, Governance, Compliance, Data Loss Prevention, Data Security POsture Management / AI Data Security</li><li><strong>Threat protection -&nbsp;</strong>Microsoft Defender XDR, Defender for Cloud, Endpoint, Identity and O365&nbsp;</li><li>Identity and Access Management (Microsoft Entra)</li></ul>Microsoft certifications in those technologies prefered.&nbsp;<br> <br><p>This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled.</p><br><br><br><p>Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about <b><u>requesting accommodations.</u></b></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series.</p><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p><p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED)</p><p></p></section>

<p><h4>Job description</h4> <p>The aircraft mechanic II - powerplant/engine – back shop mechanic (T700/701C/D, T55-714) with experience in all three MDS UH60, CH47 & AH64 performs and inspects aviation unit (AVUM), intermediate (AVIM) and depot maintenance on assigned aircraft systems.</p> <p>Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units.</p> <p>Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks.</p> <p>Perform blade blending and blade replacement in cold section of powerplants.</p> <p>Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves.</p> <p>Ability to perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine).</p> <p>Disassemble and inspect parts for wear, cracks, security, or other defects.</p> <p>Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks.</p> <h4>Minimum requirements</h4> <ul> <li>High school graduate or equivalent is required.</li> <li>Five (5) years of recent applicable aircraft maintenance experience is required.</li> <li>With A&P: two (2) years aviation maintenance experience, and two (2) years' experience on MDS UH60, CH47, & AH64 is required.</li> <li>Without A&P: must have three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience and two (2) years on the assigned mission design series UH-60, AH-64, CH-47 (MDS) to qualify.</li> <li>All experience must be within the five (5) most recent years.</li> <li>Must be in possession of a valid U.S. passport for travel internationally. Passport must contain a minimum of 6 blank pages and 2 years remaining before expiration date.</li> <li>Ability to obtain/maintain a US government security clearance (NAC-I T1) public trust. US citizenship is required to obtain a security clearance, and for facility access to this site.</li> <li>Able to clear CENTCOM MOD physicals requirement for deployment (attend CRC).</li> <li>Must be able to obtain Kuwait visa.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>May work in aircraft maintenance hangar or outside.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift up to 50 pounds.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to see imperfections, micrometer readings and other small scales.</li> <li>Must be able to communicate by voice and detect sound by ear.</li> <li>Must be able to distinguish color and judge three-dimensional depth.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> </ul> <h4>Compensation details</h4> <p>Not applicable</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>