وظائف مهندس تصميم ميكانيكي في الكويت

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times. Responsibilities SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times. ESSENTIAL FUNCTIONS + Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. + Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. + Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. + Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. + Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. + Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. + Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. + Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. + Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. + Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. + Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. + Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. + Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). + Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. + Conduct off station maintenance when required. + When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Qualifications MINIMUM REQUIREMENTS / QUALIFICATIONS + Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language. + Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration. + Graduation from a standard four (4) year high school or equivalent (GED). + Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. + Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures). + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing -“I” Level &amp; “O” Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required. + Have a strong knowledge base of Intermediate Level Maintenance business procedures. + Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license. + Must have an in-depth knowledge of technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must have a working knowledge (input and extract data) of computers. + Must be willing and able to work with job required hazardous materials. + Must be willing and able to conduct specialty on the job training. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Purpose: </strong></p><br><p>To lead the implementation, configuration, and lifecycle support of the Security Management Information System (SMIS) at the airport, ensuring robust infrastructure, efficient integration with Honeywell and 3rd party systems.</p><br><br><span>Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.</span><br>Responsibilities:<br><p><span><strong>Job Description:&nbsp;</strong></span></p><br><ul><li><span>Oversee end-to-end deployment of Genetec Security Center, including detailed configuration of Video (Omnicast) and IIoT module and Intelligent Video Analytics. Supervising the shop drawings and application projects of Security Systems Infrastructure (preferred)</span></li><li><span>Lead integration of Genetec with Honeywell and 3rd party systems. (preferred)</span></li><li><span>Perform advanced engineering calculations for system sizing, including server, storage, and network bandwidth requirements based on frame rate, resolution, retention, and redundancy.</span></li><li><span>Manage and maintain the POC/test environment, validating all solutions before production deployment.</span></li><li><span>Manage system virtualization using VMware vSphere, including deployment, snapshots, resource pools, and high-availability configurations.</span></li><li><span>Monitor HCI platforms (e.g., Dell VxRail or Nutanix) for performance, fault tolerance, and storage efficiency.</span></li><li><span>Provide daily updates and reporting to the Project Manager and collaborate closely with the Engineering Manager for design reviews, changes, and approvals.</span></li><li><span>Ensure proper documentation of configurations, topology diagrams, and system health reports.</span></li><li><span>Support testing &amp; commissioning activities and interface with stakeholders during inspections and FAT/SAT procedures.</span></li><li><span>Prepare graphics and necessary programming works as per Tender Requirement.</span></li><li><span>Be ready on the job site during temporary or final acceptance of Operational projects/ Quoted Reactive work.</span></li><li><span>Availability for and performance of duties outside of normal working hours as per agreed scheduled as directed by PM/EM</span></li><li><span>Ensure customer satisfaction through direct liaison with client representatives, customers and operational recipients.</span></li><li><span>Ensure delivery of value to Honeywell clients and customers.</span></li><li><span>Financial control per previously agreed budgets and plans.</span></li><li><span>Support PM/EM to minimize the Project Cost and Time.</span></li><li><span>Support PM/EM to prepare Progress and Cost Reports&nbsp;</span></li><li><span>Analyze backward completion of the projects with difficulties/mistakes met and make necessary suggestions for organization tuning accordingly.</span></li><li><span>Create new Variation opportunities during the Execution of the project.</span></li><li><span>Report possible future failures, disturbances and other opportunities for improvement</span></li><li><span>Estimate materials costs and quantities provide the information to the PM/EM, and Operational Sales.</span></li><li><span>Follow the Honeywell SOPs, HOS, HSE and Quality Systems while executing assigned projects</span></li><li><span>Carry out hazard and risk assessments for all tasks as per company policy and procedures.</span></li><li><span>Report near misses, incidents and other opportunities for improvement.</span></li></ul><p><span>Area of Experience:</span></p><br><ul><li><span>Large Scale Project Experience&nbsp;</span></li><li><span>Multi-National Project Experience</span></li><li><span>Airport Security System experience preferred</span></li><li><span>Honeywell and other 3rd Party Security Systems experience preferred</span></li></ul><br>Qualifications:<br><p><span><b>Qualifications &amp; Experience:</b></span></p><br><p><span><b>Must to have:</b></span></p><br><ul><li>Bachelor’s Degree in Electrical, Electronics, Computer, or IT Engineering.</li><li>Minimum 5- 8 years of relevant experience in airport-scale or critical infrastructure security systems.</li><li>Proven experience in system integration, video analytics, and smart surveillance</li></ul><p><span><b>Nice to have:</b></span></p><br><ul><li>Expert knowledge of Genetec Security Center or similar software&nbsp;</li><li>Strong experience with VMware vSphere, virtual networking, and storage (certification preferred).</li><li>Expert knowledge of IP networking, system infrastructure, failover.</li><li>Knowledge of aviation safety/security compliance standards.</li></ul><p><span><i><b>We are an equal opportunity employer and value diversity at our company. We do&nbsp;not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.</b></i></span></p><br><p><span><i><b>We will ensure that individuals with disabilities are provided reasonable accommodation to&nbsp;participate in the job application or interview process, to&nbsp;perform crucial job functions, and to&nbsp;receive other benefits and privileges of employment. Please contact us to&nbsp;request accommodation.</b></i></span></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p>Experience in Operation, process and day to day activities in Raw Mill, Coal &amp; Kiln corrective measures to improve plant performance.</p></div></section>

<p>Minimum 6 years of overall experience in construction projects, specifically in instrumentation works within Oil &amp; Gas / Refinery / Petrochemical sectors. At least 2 years of experience in Cost &amp; Estimation functions. Experience in reviewing tender documents and preparing enquiries for subcontractors/vendors. Strong computer skills (MS Office). Gulf / overseas experience preferred.</p><p><strong>Desired Candidate Profile</strong></p><b>Preferred candidate profile</b><br>Bachelors Degree (B.E./ B.Tech ) in: Electrical &amp; Electronics Engineering Electronics &amp; Instrumentation Engineering (4-year full-time course)

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>10 - 12 years experience in Oil &amp; Gas Industries. Min 3 years experience in middle east Oil &amp; Gas Construction Project experience must.</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Apply today at Hitachi Energy Full time in Kuwait City, Kuwait in our Engineering &amp; Science department and be part of a diverse and collaborative team. Hitachi Energy is a global technology leader that is advancing a sustainable energy future for all</p> </div>

Welder and fabricator<br><br>Welder and fabricator<br><br> Job Id :100194576<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Steel structure work<br><br>Basic Details<br><br>salary : 338 KWD<br><br>Qualification<br><br>Posted : 15 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Posted By: ?? ?<br><br>Contact Info<br><br>Mobile : +965 99374866<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Apply today at Hitachi Energy Full time in Kuwait City, Kuwait in our Engineering &amp; Science department and be part of a diverse and collaborative team. Hitachi Energy is a global technology leader that is advancing a sustainable energy future for all</p> </div>

<p><b>Job Description</b> : * Should have experience in EPC Companies Oil &amp; Gas refinery projects. Develop, maintain, and monitor project schedules using Primavera P6 and MS Project . Prepare detailed project execution plans, baseline schedules, and Work Breakdown Structures (WBS). Monitor engineering, procurement, construction, pre-commissioning, and commissioning progress. Track project progress against approved schedules and identify delays or schedule risks. Perform Critical Path Method (CPM) analysis and recommend recovery plans. Prepare daily, weekly, and monthly progress reports, S-curves, dashboards, and KPI reports. Coordinate with Engineering, Procurement, Construction, QA/QC, HSE, and Commissioning teams to ensure timely project execution.&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

Female Cashier for Supermarket<br><br> Cashier <br><br> Job Id :100194850<br><br>Jobs<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Minimum 2 Years of experience in supermarket<br><br>send your resume into safgroup.hr@gmail.com<br><br>Basic Details<br><br>salary : 200 KD<br><br>Qualification<br><br>Posted : 8 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : safgroup.hr@gmail.com

FABRICATORS<br><br> Job Id :100193888<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Apex Group Intl. GTC is looking for below mentioned category of employees for immediate recruitment; 01. QA/QC Engineers with KOC approval 02. Welding Inspectors with KOC approval 03. Mechanical Engineers with KOC approval 04. Downhill welders 05. Fabricators (Flow Line) 06. Fitters 07. Helpers Interested candidates may send in their C. V's to sim#6 or e-mail us to ''.<br><br>Basic Details<br><br>Qualification<br><br>Posted : 28 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Posted By: Saikumar<br><br>The current job you are viewing is either old or expired<br><br>Kindly look at the latest jobs<br><br>For the related jobs check below<br><br>Hire Resume Writers

<p>Implement and maintain the Project Quality Management System (QMS) in accordance with project specifications and international standards. Review and ensure compliance with Inspection and Test Plans (ITPs), Quality Control Procedures (QCPs), and Method Statements. Monitor fabrication, erection, installation, and testing activities for mechanical equipment and piping. Conduct inspections of pressure vessels, storage tanks, heat exchangers, boilers, pumps, compressors, and piping systems. Verify incoming material inspection (MIR) and ensure material traceability throughout the project. Coordinate with construction, engineering, clients, and third-party inspection agencies for quality inspections. Ensure welding activities comply with approved WPS, PQR, and welder qualifications. Review welding records, fit-up inspections, visual inspections, and NDT reports.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification : BE/B tech-#Mechanical Industry : #Oil &amp; Gas exp #KOC Approved added advantage Experience : Min 10 years (8 years in Oil&amp;Gas)</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Ensure the health, safety, and environmental (HSE) compliance of maritime &amp; cargo operations. Oversee everything from heavy crane operations &amp; hazardous material handling. Inspect marine vessels, port jetties heavy lifting gear to ensure SWL limits<br> <br> <p> <b>Required Candidate profile</b> </p>Functional safety, hazard identification (HAZID)&amp; knowledge of port yard &amp; stevedoring operations. B.E (Mechanical, Marine, or Industrial) combined with specialized HSE or fire safety qualifications</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Experience in Maintenance of protective equipments involved in EHV, HV and LV substations. He should have theoretical and practical knows how of all types of protection relays including Bus Bar protection relays. He should be able to test and maintain battery charger and electronic circuit in the Substation. He should be able to use all types of test kits and well versed in drawing and testing of protection relays.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / B Tech in Electrical Engineering</p><p></p></section>

<ol><li><p>Overall 6 Years Experience in Construction Project, Instrumentation Works in Oil & Gas / Refinery / Petrochemical Projects & Out of 6 Years, Min. 2 Years in Cost & Estimation Functions.</p></li><li><p>Review of Tender Documents & Preparing Enquiries for Subcontract / Vendor Service works.</p></li><li><p>Must have good computer skills (MS Office).</p></li><li><p>Gulf / Abroad Experience Preferred.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p> B. E. / Btech– Electrical & Electronics (OR) Electronics & Instrumentation Engineering (4 Years Full Time Course) </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Purpose:</b></p><ol><li>To ensure the successful execution of low voltage and ICT projects with strict adherence to QA/QC standards, while providing presales technical support and managing site activities to deliver projects on time and within budget.</li></ol><p><b>Key Responsibilities:</b></p><ul><li>Prepare and review <b>technical &amp; commercial proposals</b> for tenders and company projects.</li><li>Manage <b>QA/QC activities</b>, including preparation and review of SAT, FAT, ITP, NCR, and punch list closure.</li><li>Supervise installation, testing, and commissioning of low voltage systems such as:</li><li>CCTV</li><li>Access Control Systems</li><li>Gate Barrier &amp; Parking Management Systems</li><li>Public Address &amp; Voice Evacuation Systems</li><li>Audio Visual Systems</li><li>BMS (Johnson Controls, Siemens, Honeywell)</li><li>Coordinate with vendors and subcontractors to ensure compliance with project specifications.</li><li>Attend clarification meetings with clients and follow up on approvals.</li><li>Prepare site reports, monitor progress, and ensure compliance with health and safety standards.</li><li>Manage <b>handover documentation</b> and ensure smooth project delivery.</li><li>Stay updated with market requirements and general specifications.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Personal Skills:</b></p><ul><li>Strong communication and client-facing skills.</li><li>Ability to lead site teams and coordinate with multiple stakeholders.</li><li>Analytical thinking and problem-solving abilities.</li><li>High attention to detail and commitment to quality.</li><li>Ability to work under pressure and meet deadlines.</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Should have worked in oil sector projects, with knowledge &amp; training in ISO-9000 series like ASME and other international standards. Customer experience management. Oversee Quality Management system. Reports on Quality Metrics. Identify Safe working environment protocols. Knowledge in carrying out elevated substation electrical inspections. Preparation and issuing of inspection of quality documents as per client requirements. Knowledge in substation IEC standards, KOC, KNPC &amp; KIPIC Standards Knowledge of materials and equipment inspection. Should have knowledge about computer system.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>15 years in Oil and Gas field. 4 Years BE / BTech degree in Electrical Engineering</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Shall have experience in installation of Indoor Gas Insulated Switchgear Substation Projects with exposure of 132KV to 400KV voltage level. Responsible to supervise all the activities at Substation as per Client’s requirement, in concern to complying project task with quality and under required safety measures. To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HVAC works and to resolve arising site issues. Shall have good communication skills and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works. Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, material requisition etc. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum experience required: 7 years</p><p>4 Years BE / BTech degree in Electrical Engineering</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible to supervise all the activities at Substation as per Clients requirement, in concern to complying project task with quality and under required safety measures. To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HAVC works and to resolve arising site issues. Shall have good communication skill and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works. Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, materials requisition etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / Btech in Electrical Enigneering with minimum 7 years of experience. Shall have experience in installation of indoor Gas insulated Switchgear substation Projects with exposure of 132KV to 400 KV voltage level.</p><p></p></section>