Hydraulic Technician jobs in Kuwait

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>Establish radiation areas for radiographic operations.</p><p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>Perform nondestructive inspection on structures, components, and systems.</p><p>Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>Operate, maintain, and inspect nondestructive equipment.</p><p>Perform operator maintenance and service inspections on shop equipment and tools.</p><p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>Perform silver recovery functions.</p><p>Handle and dispose of hazardous waste and materials.</p><p>Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a highly skilled aquaculture technician with extensive experience in fish and shrimp farming. The successful candidate will have a proven track record in aquatic species management, ensuring optimal growth and health of aquatic life.</p><p>Key Responsibilities:</p><ul><li>Hands-on experience in breeding, maintenance, and monitoring of aquatic systems.</li><li>Management of water quality parameters including oxygen levels, pH, and nutrient concentrations.</li><li>Implementation of corrective actions as needed to maintain optimal conditions.</li><li>Preparation of reports every three months, with a final report at the end of the project.</li></ul><p>The selection will be based on the submitted resumes of the candidates.</p><p>Successful candidates will provide training for staff.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Extensive hands-on experience in fish and shrimp farming.</p><ul><li>Strong background in aquatic species management.</li><li>Experience in breeding and maintenance of aquatic systems.</li><li>Knowledge of water quality management.</li></ul><p>Ability to implement corrective actions as needed.</p></div>

<p>EPP III Patriot Missile Generator Rebuild and HVAC Technician Kuwait Perform 3KW 150 KW Sustainment and field level maintenance to include EPP III Engine, Main Gen, and Control Panel overhaul, troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator rebuild and HVAC Technician, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank and dynometer during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School diploma &amp; 6 yrs or BA/BS plus 2 years experience, AA/AS/plus 4 years experience,</li><li>Extensive diesel engine rebuild and generator experience.</li><li>Knowledge of generator parallel systems and switch gear.</li><li>Experience with brazing copper tubing and evacuating and recharging refrigerant.</li><li>Ability to obtain and maintain a Secret clearance within 12 months of the start date</li><li>US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA)</li><li>Must pass all medical requirements of CRC in order to deploy to the CENTCOM Area of Operations</li><li>Section 608 Technician Certification EPA (must obtain within 6 months of hire)</li></ul>

Technician <br><br> Job Id :100195367<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Position Purpose<br><br>The Restaurant Maintenance Technician is responsible for ensuring the uninterrupted, safe, and efficient operation of all restaurant equipment, kitchen machinery, and physical infrastructure. This role requires a hands-on, proactive troubleshooter who can perform preventive maintenance, execute rapid emergency repairs, and maintain a safe, code-compliant dining and kitchen environment.<br><br>Key Duties and Responsibilities<br><br> Equipment & Machinery Maintenance<br><br>Conduct routine inspections, preventative maintenance, and servicing on all heavy commercial kitchen equipment (e.g., commercial ovens, fryers, griddles, walk-in coolers, freezers, dishwashers, and ice makers).<br><br>Diagnose, troubleshoot, and repair mechanical, electrical, and plumbing issues rapidly to minimize restaurant downtime during peak service hours.<br><br>Maintain a comprehensive spare parts inventory and coordinate with vendors or manufacturers for specialized warranty repairs when necessary.<br><br>Basic Details<br><br>salary : 250-300 KD<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 50555951<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p>Al Naseem Pro is seeking experienced HVAC/Refrigeration Technicians specialising in commercial rack refrigeration systems . The technician will be responsible for the installation, servicing, maintenance, troubleshooting, and repair of centralised refrigeration rack systems used in commercial and supermarket environments.</p><p>Maintain and troubleshoot multi-compressor rack refrigeration systems . Service compressor racks, evaporators, condensers, and refrigeration circuits. Diagnose refrigerant pressure, temperature, and system performance issues. Handle refrigerant charging, recovery, and leak detection. Troubleshoot refrigeration controls and basic electrical systems. Maintain refrigeration systems serving display cabinets, cold rooms, freezers, and supermarket refrigeration . Perform preventive and corrective maintenance.</p><p><strong>Desired Candidate Profile</strong></p><p>Key Requirement: Commercial Rack Refrigeration experience is mandatory.</p><p>Proven hands-on experience in commercial rack system refrigeration . Strong knowledge of multiple compressors connected to a centralised rack . Experience with supermarket/commercial refrigeration systems. Good troubleshooting and diagnostic skills. Pease note: Candidates with only residential split AC experience will not be suitable .</p><p>Preference: 1. English speaking candidate preferred. 2. Driving License is a major advantage for selection.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Electronica for Electrical Appliances is a Kuwait-based company providing integrated solutions across Electrical Appliances and Renewable Energy, with a focus on reliable products, professional engineering, and technical support.</p><p>Electronica is seeking a <b>Solar Energy Technician </b>to join its team in Kuwait.</p><p><br></p><p><b>Key Responsibilities</b></p><p><b><span></span></b></p><ul><li>Install solar panels on rooftops and ground-mounted structures. </li><li>Install mounting systems and ensure correct panel angles and orientation. </li><li>Install and connect DC cables between solar panels. </li><li>Install inverters, protection panels, and related electrical components. </li><li>Assist with system testing, commissioning, and safety checks. </li><li>Perform solar panel cleaning and routine preventive maintenance. </li><li>Follow all site safety procedures and technical guidelines.&nbsp;</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Diploma or technical certification in solar energy, electrical technology, or a related field. </li><li>Minimum 2 years of experience in solar PV installation or maintenance. </li><li>Basic knowledge of electrical systems and solar PV components. </li><li>Ability to work outdoors and safely at heights. </li><li>Reliable, disciplined, and able to work effectively as part of a team.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a dedicated CCTV and Networking Technician to join our dynamic team in Kuwait. This role is perfect for individuals with a passion for technology and a desire to make a significant impact in the field of security and networking. As a technician, you will have the opportunity to work with cutting-edge technology and contribute to the safety and security of various environments. This position is not just a job; it's a stepping stone for your career in a rapidly evolving industry.</p><p>At our company, we believe in fostering a culture of continuous learning and professional development. You will have access to training programs that enhance your technical skills and keep you updated with the latest industry trends. Our supportive team environment encourages collaboration and knowledge sharing, ensuring that you grow alongside your colleagues. We understand that your career progression is important, and we are committed to providing you with the resources and opportunities to advance your career.</p><p>As a CCTV and Networking Technician, you will play a crucial role in maintaining and installing security systems that protect our clients' assets. You will be involved in troubleshooting issues, ensuring systems are operational, and providing exceptional customer service. If you are looking for a role that offers both challenges and rewards, this is the perfect opportunity to elevate your career in the technology sector.</p><p><b>Responsibilities:</b></p><ol><li>Install, configure, and maintain CCTV systems, ensuring high-quality video surveillance and optimal performance for various clients.</li><li>Conduct thorough troubleshooting of networking issues, using diagnostic tools to identify and resolve connectivity problems effectively.</li><li>Provide technical support to clients, addressing inquiries and ensuring their security systems operate seamlessly.</li><li>Collaborate with team members to design and implement network infrastructures that meet clients' specific security needs and requirements.</li><li>Document installation processes and maintenance activities to maintain accurate records and facilitate future troubleshooting.</li><li>Stay updated on industry trends and advancements in CCTV and networking technologies to provide clients with the best solutions available.</li><li>Train clients on the proper use of installed systems, ensuring they are equipped to utilize the technology effectively.</li><li>Perform regular system checks and preventive maintenance to ensure all equipment remains in optimal condition.</li><li>Assist in the development of proposals and project plans to expand our service offerings and enhance client satisfaction.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficiency in installing and configuring CCTV systems to ensure optimal security coverage.</li><li>Strong understanding of networking principles and troubleshooting techniques for effective problem resolution.</li><li>Excellent customer service skills to provide support and training to clients.</li><li>Knowledge of industry standards and best practices in security system installations.</li><li>Ability to work collaboratively within a team to achieve project goals efficiently.</li><li>Strong documentation skills to maintain accurate records of installations and maintenance.</li><li>Willingness to stay updated with evolving technologies and industry trends to enhance service offerings.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication</b>:</p><ul><li> The ability to communicate effectively verbally and in writing with employees and workers at all levels.</li><li> Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Skills and Abilities</b>:</p><ul><li> Good knowledge of fire protection systems, fire prevention procedures, and first aid.</li><li> Practical knowledge of local occupational safety, environmental, and building safety requirements.</li><li> Basic knowledge of applicable environmental and labor laws and regulations.</li><li> Working knowledge of occupational health and safety standards, particularly <b>ISO 45001</b>.</li><li> Good understanding of quality, health, safety, and food industry requirements.</li><li> Good problem-solving and observation skills.</li><li> Ability to work accurately and take responsibility for assigned tasks.</li><li> Ability to work effectively under pressure.</li><li> Professional, objective, and ethical approach.</li><li> Good teamwork and communication skills.</li><li> Strong attention to safety details and potential hazards.</li><li> Ability to maintain company property and confidentiality.</li></ul><p>Technical Skills</p><ul><li> Good computer skills and ability to use electronic systems and standard office applications.</li><li> Ability to maintain safety records and documentation electronically.</li></ul><p>Language Requirements</p><ul><li><b>Arabic:</b> Fluent.</li><li><b>English:</b> Good proficiency is preferred.</li></ul><p>Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li> Diploma in <b>Occupational Health and Safety, Occupational Safety, or Public Health</b>, along with specialized training in <b>ISO 45001</b>.</li><li> High School Diploma with specialized training and certifications in <b>Occupational Health and Safety and ISO 45001</b>.</li><li> Certifications such as <b>IRCA Certified Lead Auditor, HACCP, and OSHA</b> are preferred.</li></ul><p><b>Experience:</b></p><ul><li><b>Fresh graduates</b> may be considered.</li><li><b>3-5 years of experience</b> in Safety Management, Occupational Health &amp; Safety, or a related field.</li><li> At least <b>2 years of experience in the food manufacturing industry or government entities</b> is preferred.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for assisting the Safety Technician and Safety Shift Supervisor in implementing occupational health, safety, environmental, and industrial safety procedures. The role supports safety inspections, risk identification, emergency preparedness, fire protection systems, employee awareness, and safety documentation to help ensure a safe and compliant workplace.</p><p>Key Responsibilities</p><ul><li>Assist with monitoring occupational health, safety, and industrial safety conditions across company work areas.</li><li>Assist in assembling, installing, adjusting, servicing, and checking the readiness of safety equipment and systems.</li><li>Prepare inspection requirements, including measuring instruments, records, and personal protective equipment (PPE), and ensure they are ready for use.</li><li>Assist in preparing the required materials and equipment for investigations of workplace accidents and injuries.</li><li>Implement approved safety and occupational hazard prevention procedures at work sites.</li><li>Assist in monitoring employee compliance with company safety policies, procedures, laws, and industrial safety standards.</li><li>Conduct daily inspections of work areas, identify hazardous conditions, isolate dangerous areas, and support corrective actions where possible.</li><li>Follow the instructions of the Safety Technician, Safety Shift Supervisor, and Safety Officer.</li><li>Support the Safety Technician in delivering safety orientation and training to new employees.</li><li>Ensure employees properly wear and use the required personal protective equipment (PPE).</li><li>Participate in the implementation of occupational health, safety, and industrial safety plans and procedures.</li><li>Participate in periodic inspections of facilities and equipment to ensure they are safe and compliant.</li><li>Participate in investigations of workplace accidents, incidents, and injuries.</li><li>Maintain and update occupational health, safety, and industrial safety records.</li><li>Support the integration of health, safety, and environmental (HSE) practices into daily operations.</li><li>Follow applicable <b>ISO 45001 and ISO 14001</b> standards and practices.</li><li>Support company safety objectives and contribute to meeting applicable international safety requirements.</li><li>Participate in risk identification, analysis, and assessment for operational processes and employee job functions.</li><li>Conduct routine testing of fire alarm and fire protection systems and verify their operational effectiveness.</li><li>Support the implementation of emergency response and evacuation plans.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good knowledge of fire protection systems, fire prevention procedures, and first aid.</li><li>Practical knowledge of local occupational safety, environmental, and building safety requirements.</li><li>Basic knowledge of applicable environmental and labor laws and regulations.</li><li>Working knowledge of occupational health and safety standards, particularly <b>ISO 45001</b>.</li><li>Good understanding of quality, health, safety, and food industry requirements.</li><li>Good problem-solving and observation skills.</li><li>Ability to work accurately and take responsibility for assigned tasks.</li><li>Ability to work effectively under pressure.</li><li>Professional, objective, and ethical approach.</li><li>Good teamwork and communication skills.</li><li>Strong attention to safety details and potential hazards.</li><li>Ability to maintain company property and confidentiality.</li></ul><p>Technical Skills</p><ul><li>Good computer skills and ability to use electronic systems and standard office applications.</li><li>Ability to maintain safety records and documentation electronically.</li></ul><p>Language Requirements</p><ul><li><b>Arabic:</b> Fluent.</li><li><b>English:</b> Good proficiency is preferred.</li></ul><p>Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li>Diploma in <b>Occupational Health and Safety, Occupational Safety, or Public Health</b>, along with specialized training in <b>ISO 45001</b>.</li><li>High School Diploma with specialized training and certifications in <b>Occupational Health and Safety and ISO 45001</b>.</li><li>Certifications such as <b>IRCA Certified Lead Auditor, HACCP, and OSHA</b> are preferred.</li></ul><p><b>Experience:</b></p><ul><li><b>Fresh graduates</b> may be considered.</li><li><b>3-5 years of experience</b> in Safety Management, Occupational Health &amp; Safety, or a related field.</li><li>At least <b>2 years of experience in the food manufacturing industry or government entities</b> is preferred.</li></ul><p><br></p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><span>Join a team committed to a mission! </span></b></p><br><p><b><span>At Leidos</span></b>, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.</p><br><p><b><span>Are you ready for your next career challenge?</span></b></p><br><p>The Defense Sector at Leidos has an opening for a Supply Technician I in support of Storage Area Operations for the Ammunition Supply Activity Program ASP/TSA in Kuwait. The Supply Technician I reports directly to the Project Manager.</p><br><p><b>Responsibilities:</b></p><br><ul><li>Performs a variety of Class V warehousing duties to include: Ammunition and Residue receipts, issues, shipments, turn-ins, re-warehousing and inter-depot transfers.</li><li>Verifies materials against receiving documents noting and reporting discrepancies and obvious damage.</li><li>Routes material to prescribed storage locations.</li><li>Stocks, stack’s and palletizes munitions.</li><li>Prepares and uses magazine data cards.</li><li>Prepares lite boxes.</li><li>Rearranges and inventories stored munitions.</li><li>Examines stored materials and reports deterioration and damage.</li><li>Removes munitions from storage and issues munitions upon receipt of proper documentation.</li><li>Reports any unauthorized access to restricted areas.</li><li>Ensures operational areas are free of debris and rubbish.</li><li>Operates Material Handling Equipment.</li><li>Other duties as assigned.</li></ul><p><b>Basic Qualifications:</b></p><br><ul><li>High School Diploma or equivalent and 1 or more years of supply and logistical experience, ammunition storage experience a plus.</li><li>Active DOD Secret security clearance or the able to obtain and maintain a SECRET security clearance.</li><li>Ability to apply critical thinking skills to complex issues.</li><li>Commitment to outstanding customer service, both internal and external.</li><li>Experience resolving complex issues utilizing external resources and escalating internally when appropriate.</li><li>Ability to multi-task and stay organized in a fast-paced environment.</li><li>Ability to maintain a consistent on-site schedule.</li><li>Must be able to obtain and maintain a Kuwait Driver’s license and hold a valid U.S. driver’s license.&nbsp;</li><li>Must be able to obtain a Kuwaiti work visa.</li></ul><p><b>Preferred qualifications:</b></p><br><ul><li>Active DoD Secret security clearance.</li><li>Experience in ammunition storage, issue, receipt, preparation, safety and accountability procedures.</li><li>Experience in the operation of Material Handling Equipment (MHE- example: Forklift, RTCH).</li></ul><p><b>IMPORTANT NOTE:</b> Kuwaiti Immigration Requirements for obtaining a Kuwaiti work visa include but are not limited to obtaining and providing an authenticated police background check verifying NO prior criminal history. At this time Kuwait is not approving residency visa’s for those 60 years of age and older.</p><br><p>DABAOPP1</p><br><p>If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.</p><br><u><b>Original Posting:</b></u>September 10, 2026<p>For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.</p><br><br><br><br><br><br><br><br><b><u>Pay Range:</u></b>Pay Range $35,750.00 - $64,625.00<p><span>The Leidos pay range for this job level is a general guideline only&nbsp;and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.</span></p><br> </div>

Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.<br><br>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.<br><br>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.<br><br>USAF equivalent position is Munitions/Weapons Technician Apprentice.<br><br>Essential Responsibilities: <br><br> Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction. Assist in management of all inspection, maintenance, and storage of munitions and support equipment. Support quality assurance, compliance, continuity, and standardization of munitions programs. Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. Maintain weapons certification and currency. Assist with availability and serviceability of munitions to support and meet customer requirements. Perform all other duties as assigned or requested. <br><br>Minimum Requirements:<br><br> Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. Completed USAF Munitions/Weapons Tech School or DoD equivalent. Must possess basic knowledge of technical publications related to aircraft maintenance. Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to Deploy to Forward Locations (other countries) as Directed by the Government. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must submit updated SF-86 within 30 days of hire start date. Must have current/active State Issued Driver’s License. Must be able to acquire and maintain a valid flight-line Government Driver’s License. Must have valid U. S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster.  Accommodations may be available under limited circumstances. <br><br> Preferred Qualifications:<br><br> Associate degree in a relevant career field. RPA Deployment Experience. Prior Experience as a Defense Contractor. Munitions/Weapons experience within the last 10 years.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Red Switch Technician I will be required to operate and maintain the DRSN facility in accordance with Defense Information Systems Agency (DISA) Regulations and guidelines. Responsible for organizing and implementing system and office upgrades with Raytheon, DISA and local offices. Prepare and maintain DRSN facility in accordance with various agency checklist requirements such as Quality Control (QC), DRSN Security, DISA Performance Evaluation (PE), Communications Security (COMSEC), etc. Responsible for ensuring subscribers are trained on the features and capabilities of their phone instruments and are operating their DRSN phones within the prescribed security requirements. Reports to Red Switch Supervisor. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Operation and Maintenance (O&amp;M) of the Digital Small Switch DSS-2A Monitor trunk and circuit outages as well as the administrative terminal and Enhanced Command Console (ECC). + Perform direct trunk dialing checks over trunk channels associated with the switch to ensure satisfactory operation of voice circuits (at least once each shift and following any trunk failure). + Perform Preventive Maintenance Inspections (PMIs) on the switch and peripheral equipment. + Conduct systems checks every 2 hours. + Create and update databases in the administrative terminal using information received from users, Raytheon, and DISA. + Perform database backups to CD-R discs. + Perform database downloads to update switch configurations. + Update and print out telephone console information and line strips for users. + Fabricate custom interface cables using hand tools and wiring diagrams. + Escort individuals requiring access to the Red Switch in the performance of their duties. + Ensure that all outages are reported in a timely manner to the DISA GNOSC, NOC-K, TCF, V2X management for tracking in Army Enterprise Service Management Platform (AESMP) ticketing system. + Provide hourly status updates to designated agencies regarding outages, etc. + Annotate all activities in the Master Station Log (MSL) database. + Prepare call detail history reports for DISA and military personnel as directed. + Contribute to weekly reports with regard to your additional duties and other assigned tasks. + Complete individual timesheets on a daily basis. + Check the Regional Cyber Center (RCC) website for accuracy regarding authorized service interruptions (ASIs) and outages. + Initiate Quality Control checklists as they pertain to your additional duties. + Update training records as needed. + Update memorandums and technical drawings (including block diagrams and schematics) as directed. + Inventory Communications Security (COMSEC) equipment and document DA Form 2653-R (each shift). + Work with military technical monitor(s), Special Security Office (SSO) and other Department of Defense contractors and civilians including local hires in support of the DRSN mission. + Interface with technicians from Outside Plant, DPW, FMO etc. regarding installations in support of the DRSN mission. + Coordinate with the Raytheon Help Desk for troubleshooting problems that cannot be resolved locally. + Contact the Return Merchandise Authorization (RMA) Help Desk in order to obtain an RMA for processing Depot equipment repairs. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Active Top Secret SSBI within the past two years. + Individual must be eligible for Sensitive Compartmentalized Information (SCI) Access. + Education / Certifications: One year of related experience may be substituted for one year of education, if a degree is required. + High School Diploma required. + Bachelor’s Degree in IT or related field preferred. + Cardiopulmonary Resuscitation (CPR) (Provided by contract) + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree. + Seven years’ experience in Communications-Electronics Maintenance functions: + installation, troubleshooting and repair of electronic communications equipment. + Use of phone + Digital sender, and desktop computer in a fast-paced office environment is desirable. + A working knowledge of Microsoft Office software is required. Must be able to work rotating shift schedules which provide 24-hour day/7-day week coverage. + Military or civilian technical training course of six (6) months or more is required. + This should be followed by a minimum of 24 months of on-the-job training (OJT). + A certificate of completion will suffice until verification of the training on your DD-214 can be completed. + Experience with a customer service-oriented company At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Red Switch Technician II will supervisor Red Switch Technician I personnel and operate and maintain (O&amp;M) the Defense Red Switch Network (DRSN) facility in accordance with Defense Information Systems Agency (DISA) regulations and guidelines. Responsible for organizing and implementing system and facility upgrades with Raytheon, DISA, and local agencies. Prepare and maintain DRSN facility in accordance with various agency checklist requirements such as Quality Control (QC), DRSN Security, DISA Performance Evaluation (PE), Communications Security (COMSEC), etc. Train DRSN technicians and military deployment teams on operation, maintenance, and troubleshooting of equipment. Brief various levels of management within the civilian and military sector on DRSN operations and requirements. Responsible for ensuring subscribers are trained on the features and capabilities of their phone instruments and are operating their DRSN phones within the prescribed security requirements. Responsible for providing DRSN Operations and Maintenance (O&amp;M) support. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + O&amp;M of the Digital Small Switch (DSS-2A). Monitor trunk and circuit outages as well as the administrative terminal and Enhanced Command Console (ECC). + Perform direct trunk dialing checks on trunk channels associated with the switch to ensure satisfactory operation of voice circuits (at least once each shift and following any trunk failure). + Perform Preventive Maintenance Inspections (PMIs) on the switch and peripheral equipment. + Create and update databases in the administrative terminal using information received from users, Raytheon, and DISA. + Perform database backups to CD-R discs. + Perform database downloads to update switch configurations. + Update and print out telephone console information and line strips for users. + Fabricate custom interface cables using hand tools and wiring diagrams. + Escort individuals requiring access to the Red Switch in the performance of their duties. + Ensure that all outages are reported in a timely manner to the DISA GNOSC, NOC-K, TCF, V2X management for tracking in Army Enterprise Service Management Platform (AESMP) ticketing system. + Provide hourly status updates to designated agencies in regard to outages, etc. + Annotate all activities in the Master Station Log (MSL) database. + Prepare call detail history reports for DISA and military personnel as directed. + Contribute to weekly reports with regard to your additional duties and other assigned tasks. + Complete individual timesheets on a daily basis. + Check the Regional Cyber Center (RCC) website for accuracy with regard to authorized service interruptions (ASIs) and outages. + Initiate Quality Control checklists as they pertain to your additional duties. + Update training records as needed. + Update memorandums and technical drawings (including block diagrams and schematics) as directed. Inventory Communications Security (COMSEC) equipment and document DA Form 2653-R (each shift). + Work with military technical monitor(s), Special Security Office (SSO) and other Department of Defense contractors and civilians including local hires in support of the DRSN mission. + Interface with technicians from Outside Plant, DPW, etc. regarding installations in support of the DRSN mission. + Coordinate with the Raytheon Help Desk for troubleshooting problems that cannot be resolved locally. + Contact the Return Merchandise Authorization (RMA) Help Desk in order to obtain a RMA for processing depot equipment repairs. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Active Top Secret SSBI within the past two years. + Individual must be eligible for Sensitive Compartmentalized Information (SCI) Access. + Education / Certifications: One year of related experience may be substituted for one year of education, if a degree is required. + High School Diploma required. + Bachelor’s Degree in IT or related field preferred. + Cardiopulmonary Resuscitation (CPR) (Training provided by contract) + This position requires candidates to adhere to DISA requirement. All candidates are required to maintain at least one (1) baseline certification. + The authorized certification for this job title are listed as follows: + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Seven years’ experience in Communications-Electronics Maintenance functions: + installation, troubleshooting and repair of electronic communications equipment. + Use of phone + Digital sender, and desktop computer in a fast-paced office environment is desirable. + A working knowledge of Microsoft Office software is required. Must be able to work rotating shift schedules which provide 24-hour day/7-day week coverage. + Military or civilian technical training course of six (6) months or more is required. + This should be followed by a minimum of 24 months of on-the-job training (OJT). + A certificate of completion will suffice until verification of the training on your DD-214 can be completed. + Experience with a customer service-oriented company. + SUPERVISORY / BUDGETARY RESPONSIBILITIES + At least two years of supervisory or lead experience is preferred. + Update proprietary applications regarding: + Update section employee daily status, leave, sick, on site, etc. + Verify and track accomplishment of section monthly or quarterly safety and compliance training + Purge section employee expired certifications + Verify section employee compliance training in Virtual Training Record + Verify section vehicle logs are being kept accurately and uploaded + Ensure section personnel are maintaining their 8570 / 8140 certifications + Review weekly training compliance reports for accomplishment prior to suspense. + Review and approve leave forms ensuring before approval all compliance training is current. + Coordinate transportation and integration of new and returning employees. + Document and promptly counsel poor performance and policy violations. + Enforce all V2X, GO 1, and dress code policies. + Provide annual employee appraisal feedback in a professional and constructive manner. + Demonstrate V2X values Integrity, Respect, Responsibility, and Professionalism. + Ensure the safety of personnel and monthly safety inspections are properly conducted. + Communicate effectively up and down the chain of command. + Manage work schedules. + Conduct proper new and returning employee orientation and ensure employee thorough understanding and can accomplish all tasks in the Employee Job Certification (EJC) + Work with employees and HR when emergencies or abnormal circumstances occur. + To the best of your ability render all decisions based upon our company values and principles of Integrity, Respect, Responsibility, and Professionalism. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Four Seasons:</b></p><br><br><p>Four Seasons is powered by our people. We are a collective of individuals who crave to become better, to push ourselves to new heights and to treat each other as we wish to be treated in return. Our team members around the world create amazing experiences for our guests, residents, and partners through a commitment to luxury with genuine heart. We know that the best way to enable our people to deliver these exceptional guest experiences is through a world-class employee experience and company culture.<br>At Four Seasons, we believe in recognizing a familiar face, welcoming a new one and treating everyone we meet the way we would want to be treated ourselves. Whether you work with us, stay with us, live with us or discover with us, we believe our purpose is to create impressions that will stay with you for a lifetime. It comes from our belief that life is richer when we truly connect to the people and the world around us.</p><br><br><br><br><p><b>About the location:</b></p><br><br>A resort-like sanctuary in Kuwait’s heart. Discover a modern urban sanctuary in the heart of Kuwait City: a contemporary curation of Middle Eastern architecture, dazzling art and resort-like spaciousness, where striking sculptures seamlessly merge with traditional design. In this enclave of wonder – the first and only hotel in Kuwait to receive the prestigious Forbes Five-Star rating – you’ll find soaring rooftop restaurants, leisure facilities and the city’s largest guest rooms. Catch up with friends in the chic surrounds of Al Soor (known as La Chocolaterie of Kuwait), relax in air-conditioned cabanas by the infinity pool, ascend to a buzzing rooftop and wander the lush adjacent parkland. And with the city’s malls and souks within a few minutes’ drive, you can experience all the spoils of the city without spoiling your precious relaxation time.<br><br><p><b>What You Will Do</b></p><br><br><ul><li><p>Install, inspect, maintain, and repair HVAC systems, including chillers, air-handling units, fan coil units, and exhaust systems.</p><br><br></li><li><p>Conduct regular preventive maintenance and respond promptly to repair requests.</p><br><br></li><li><p>Troubleshoot system malfunctions and ensure timely resolution to minimize downtime.</p><br><br></li><li><p>Monitor and adjust temperature control systems to maintain guest comfort.</p><br><br></li><li><p>Maintain accurate logs and records of maintenance and repair work.</p><br><br></li><li><p>Ensure all work complies with Four Seasons safety, hygiene, and quality standards.</p><br><br></li></ul><br><p><b>What You Bring</b></p><br><br><ul><li><p>Minimum 2 years of experience as an HVAC Technician, preferably in a luxury hotel or commercial facility.</p><br><br></li><li><p>Strong knowledge of HVAC systems, controls, and refrigeration principles.</p><br><br></li><li><p>Skilled in preventive maintenance and troubleshooting.</p><br><br></li><li><p>Team-oriented with excellent communication and problem-solving skills.</p><br><br></li><li><p>Flexibility to work on a rotating schedule, including weekends and public holidays.</p><br><br></li></ul><br><p><b>What We Offer</b></p><br><br><ul><li><p>Full board shared living accommodation in high-quality, well-resourced staff housing.</p><br><br></li><li><p>Complimentary stays at Four Seasons Hotels worldwide.</p><br><br></li><li><p>Paid annual home leave tickets.</p><br><br></li><li><p>Quality employee meals.</p><br><br></li><li><p>Complimentary transportation to and from work.</p><br><br></li><li><p>Regular social, cultural, and sporting events.</p><br><br></li><li><p>Comprehensive medical coverage.</p><br><br></li></ul><br><p><b>Work Authorization</b></p><br><br><p>The Hotel will apply for work authorization for the successful candidate.</p><br><br><br><p>We look forward to receiving your application and welcoming you to the Four Seasons family.</p><br><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Leidos Defense Sector is hiring a <b>Field Service Technician</b> to support US Army Central G2.  The program provides IT repair, maintenance, operations, logistics, and engineering services to help ensure secure, reliable, and uninterrupted availability of Army Military Intelligence Enterprise IT Systems as well as network administration support for an organization comprised mostly of a Microsoft Enterprise software environment residing on multiple networks.</p><br><p>The Field Service Technician will be part of a dynamic team supporting customers throughout the ARCENT Area of Responsibility including both U.S. and coalition personnel.</p><br><p>This is a deployed position located at Camp Arifjan, Kuwait.</p><br><p>Duty hours are 12 hours per day, 7 days per week, and are subject to local labor laws. This position also requires 24/7 on call availability, including weekends and holidays.</p><br><p><b>Primary Responsibilities: </b></p><br><ul><li>Provide Tier I and II customer service support as part of a service desk team across multiple networks, facilities, and locations (in-person telephonically or electronically submitted via ticket system); escalate incidents to higher Tier II or Tier III when required</li><li>Complete basic and advanced hardware and infrastructure work including cable management at both workstations and in-server rooms, workstation installations, checking UPS systems, replacing hardware components of laptops &amp; desktops, basic printer maintenance, etc.</li><li>Remediate problems with Windows desktops, laptops, printers, digital senders, video teleconference systems, VOIPs</li><li>Execute basic Active Directory tasks and manage NTFS permissions such as share folder access, etc.</li><li>Troubleshoot, diagnose, and resolve software issues with MS Office and Outlook, Adobe, Java, PKIs</li><li>Apply patches and updates to workstations both locally and remotely, and using PowerShell, RDP</li><li>Track all work in designated incident database tools &amp; systems (such as Remedy), ensure tickets are completed accurately and in a timely manner</li><li>Support In &amp; Out process users, including creating accounts, setting up workstations, mapping drives, and printers</li><li>Schedule and de-conflict Video Teleconferences</li><li>Conduct site surveys and installation of IT equipment</li><li>Participate in or lead special projects and day‐to‐day operations as needed or assigned by the site lead, including surging to alternate locations for customer requirements or to backfill personnel during R&amp;R or other absences</li></ul><p><b>Basic Qualifications:</b></p><br><ul><li>Bachelor's degree and 2+ years of prior relevant experience. Additional years of experience may be considered in lieu of a degree.</li><li>Active TS/SCI security clearance (in DISS).</li><li>Active 8570 IAT II (or higher) Baseline Certification, such as: Security+|ce.</li><li>Active Windows Computing Environment certification, such as: MS-900: Microsoft 365 Fundamentals, MD-102: Microsoft 365: Endpoint administrator Associate, etc., or the ability to obtain after hire.</li><li>Experience resolving Tier I and II hardware, software and application issues (printer, basic network (LAN), scheduling &amp; troubleshooting video tele-conferences (VTCs).</li><li>Working knowledge of Active Directory Users &amp; Computers, security groups/NTFS permissions, Cisco network/LAN principles, MS Windows 11, MS Office, desktop &amp; laptop hardware, etc.</li><li>Ability to work 12-hour shifts on-site, 7 days per week.</li><li>On-call availability 24x7, including weekends and holidays.</li><li>Current U.S. passport with at least 36 months validity and 5 blank pages.</li><li>Must successfully complete CRC processing and medical screening and be designated “fit for deployment” (including medical tests and BMI analysis).</li><li>Must obtain and maintain host nation work visa, including required local/regional medical testing.</li><li>Must be willing to live and work in the State of Kuwait or deploy to austere forward locations as required.</li><li>Must comply with all corporate policies, local site policies, host nation laws, customs, and courtesies.</li></ul><p><b>Preferred Qualifications: </b></p><br><ul><li>Active IT certification, such as: AZ-802:Windows Server hybrid administrator, CCNA, VCTA, NCDA.</li><li>Experience with US Intelligence networks and organizations in South-West Asia or on a Camp Arifjan service desk.</li></ul><p>AMSOPP1</p><br><p>If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.</p><br><u><b>Original Posting:</b></u>September 1, 2026<p>For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.</p><br><br><br><br><br><br><br><br><b><u>Pay Range:</u></b>Pay Range $59,150.00 - $106,925.00<p><span>The Leidos pay range for this job level is a general guideline only&nbsp;and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.</span></p><br> </div>

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>Under the supervision of the Project Manager (PM), the Lead Technical Inspector (Quality Assurance) performs Field and Sustainment-Level Initial, In-Process, Verification, and Final Inspections of equipment and process outputs, in support of LOGCAP V Contract. As Lead technical Inspector, provide technical guidance and supervision to subordinates. Perform estimated Cost of Damage (ECOD), Actual Cost of Damage (ACOD), Estimated Costs of Fabrications (ECOF) and Estimated Cost of Repair (ECOR) inspections and verify condition codes. Performs Quality Assurance/Quality Control (QA/QC) functions. Understands all shop functional requirements and provides assistance and coverage whenever needed.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </p> <ul> <li> <p>Perform initial, in-progress and final inspections on IAW applicable Army Regulations, Technical Manual &amp; Industry Standards.</p> </li> <li> <p>Reads blueprints, sketches and modification orders to plan the process and layout to be performed in an expeditious, economical and effective manner.</p> </li> <li> <p>Input all deficiencies and shortcoming as well as parts needed in GCSS-Army </p> </li> <li> <p>Conduct research for manuals and parts</p> </li> <li> <p>Determines type and quantity of material, and orders material required to perform repair or fabrication IAW customer work request.</p> </li> <li>Assists in coaching subordinates in ensuring all current Internal Operating Procedures (IOP) and quality regulations are complied with.</li> <li>Completes and reviews work order documentation to ensure for accuracy and completeness.</li> <li>Responsible for observing all current ES&amp;H and fire regulations. Ensures a safe work area by ensuring employees are utilizing appropriate personal protective equipment (PPE), warning devices, and proper vehicle/equipment placement.</li> <li>Prepares necessary paperwork showing labor and supplies used for job order.</li> <li>Uses proper Test, Measurement and Diagnostic Equipment (TMDE) in the daily operations phase.</li> <li>Interprets technical references.</li> <li>Performs other duties and assignments as required.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Education/Certifications: </strong> <br> <ul> <li>One year related experience may be substituted for one year of education, if degree is required.</li> <li>High school diploma or equivalent. Must provide a copy of the diploma.</li> <li>Formal training (completion of MOS 91C, D, J or L course conducted under the auspices of the USA Ordinance School) is mandatory or meet verifiable civilian acquired skills criteria. </li> <li>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</li> <li>Must be a U.S. Citizen</li> <li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li> <li>A valid driver s license and the ability to obtain a U.S. Government Motor Vehicle Operator s License and Kuwait Heavy Duty Driver s License.</li> </ul> </li> <li> <strong>Experience:</strong> <br> <ul> <li>Minimum of (2) years of experience as a heating, ventilation, and air conditioning (HVAC) technician; or a combination of formal training and experience totaling.</li> <li>A minimum of 8-10 years of experience performing technical inspection of tactical military equipment is required with a minimum of two (2) years of experience in supervisory leadership.</li> </ul> </li> <li> <strong>Skills:</strong> <br> <ul> <li>Strong interpersonal and negotiation skills.</li> <li>Collaborative work style fostering cooperation and teamwork.</li> <li>Ability to work effectively with employees and management of all levels to include multi-national staff, superiors, and ranking military officers.</li> <li>Ability to handle confidential company and employee information with complete discretion.</li> <li>High-level communication skills in English, both verbally and written.</li> <li>Basic proficiency in Word, Excel, and Outlook applications.</li> <li>High-level organization and planning skills so workflow is managed efficiently and accurately.</li> <li>Ability to read, analyzes, and interprets reports and documents.</li> <li>Expert knowledge in welding and repair requirements for military equipment/ferrous and nonferrous metals using oxyacetylene, electric arc, and inert gas welding equipment.</li> <li>Expert knowledge of Field Level Maintenance Metal Worker tasks.</li> <li>Ability to obtain a CAC and GCSS-Army access.</li> </ul> </li> <li> <strong>Working Conditions:</strong> <br> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <br> <ul> <li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> <p> </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-08-12&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-TX-EL PASO-M2 ~ 7201 Montana Ave ~ BLDG M2&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required on day 1<br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><br><p><b>What You Will Do :</b></p><br><br><p>The Patriot Power Generation Frequency Converter Maintenance Technician supports the Kuwait Air Defense Force (KADF) Patriot program. Participates in power frequency convertor improvement and repair on the KADF Patriot systems. Shall be responsible for the repair and maintenance of all generators to include installation, Preventive Maintenance Checks and Services (PMCS), and operations. Will also coordinate with generators in the daily operations, repair, maintenance, PMCS, and generator fueling. Provides technical and engineering advice to the KADF Patriot program leadership. Participate in preventive maintenance operations at all maintenance levels. Performs troubleshooting, fault isolation and field maintenance repair for all frequency convertors for all systems. Functionally tests power frequency convertors after making repairs to assure compliance with design specifications and standards. Participates in the opening and closing of work orders and in on-the-job training (OJT). Implements approved engineering changes. Enforces approved KADF safety policies, procedures, and standards. Performs job related duties as specified by the user unit.</p><br><br><br><p><b>This position is located in Kuwait.</b></p><br><br><br><p><b>&nbsp;Qualifications You Must Have :</b></p><br><br><ul><li>Graduate from technical school in electronics or manufacturer's course of instruction on power frequency convertors, or equivalent on-the-job training (OJT).</li><li>Must have a minimum of five (5) years’ experience in troubleshooting and repair of power frequency convertors.</li><li>Must be proficient in troubleshooting, fault isolation and repair of various types of power frequency convertors. Skill in the use of engineering drawings, schematic diagrams, general purpose commercial test equipment and common tools is required.</li><li>Proficiency in the English language, spoken and written.</li><li>Requires current SECRET Clearance</li></ul><br><p><b>Qualifications We Prefer:</b></p><br><br><p>Knowledge of the Patriot Missile System</p><br><br><br><p><b>Required Education:</b></p><br><br><br><p>Bachelor’s Degree with 5 years of related experience, or Associates Degree with 8 years’ experience or HS Diploma/GED with 12 years of related experience. </p><br><br><br><p><b>What We Offer:</b></p><br><br><p>Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.</p><br><br><br><p><b>Additional Information:</b></p><br><br><br><p>Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products</p><br><br><br><p>#Patriot</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div>

<p>URGENT OVERSEAS JOB OPPORTUNITIES KUWAIT AMOZA Overseas Recruitment brings you exciting career opportunities with SALEM M. Al-Nisf, Kuwait , for experienced professionals in Transformer &amp; Switch Gear Divisions .</p><p>TRANSFORMER DIVISION</p><p>SWITCH GEAR DIVISION</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have Transformer Experience</li><li>Relevant Transformer / Switch Gear experience is mandatory for the respective positions.</li></ul>

<ul><li>Install, repair, and maintain piping systems for various applications including water, gas, and steam.</li><li>Read and interpret blueprints and technical drawings to determine the layout of piping systems.</li><li>Measure and cut piping materials to precise specifications using specialized tools and equipment.</li><li>Ensure all installations comply with local codes and regulations, maintaining a high standard of safety.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; vocational training in plumbing or pipe fitting is preferred.</li><li>Minimum of 3 years of proven experience in pipe fitting, preferably in industrial or commercial settings.</li><li>Relevant certifications, such as a Pipefitter Certification or Journeyman License, are highly desirable.</li><li>Experience with various pipe materials, including PVC, copper, and steel, showcasing versatility.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li>Ability to communicate effectively verbally and in writing.</li><li>Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Abilities and Skills:</b></p><ul><li>Familiarity with safety and quality standards.</li><li>Good knowledge of production processes and food safety.</li><li>Optimal interaction with company members and mastering work while preserving company property and its secrets.</li><li>Ability to work under pressure.</li><li>Good knowledge of mechanical systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to conduct technical analyses.</li></ul><p><b>Languages:</b></p><p>• Ability to communicate in Arabic or English, at least at a conversational level.</p><p><b>Personal Skills:</b></p><ul><li>Flexibility in work.</li><li>Responsibility and building trust with others.</li><li>Teamwork skills.</li><li>Knowledge of labor laws.</li><li>Punctuality.</li><li>Accuracy and focus.</li><li>Job competencies.</li><li>Required competency rating.</li></ul><p><br></p><p><b>Tasks and Responsibilities</b></p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p><b>Required Skills &amp; Competencies</b></p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for inspecting, maintaining, troubleshooting, and repairing mechanical equipment and machinery to ensure safe, reliable, and efficient operation. The role supports preventive maintenance activities, equipment installation, technical analysis, spare parts coordination, and compliance with safety and quality standards.</p><p>Key Responsibilities</p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p></div>

IT Support<br><br> Job Id :100194269<br><br>Jobs<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br> Proven experience in desktop/laptop support (Windows & Mac preferred) Strong skills in hardware and software troubleshooting Experience in user support, printer/network configuration, and system maintenance Familiarity with ticketing systems and remote support tools Basic knowledge of Active Directory, email configuration, and network fundamentals Excellent communication and problem-solving skills Ability to work independently and handle multiple support requests<br><br>Location: Ahmadi<br><br>Availability: Immediate preferred<br><br>Interested candidates may share their CVs to netit76748@gmail.com.<br><br>Basic Details<br><br>Qualification<br><br>Posted : 20 days ago<br><br>Job Type : Full-Time<br><br>Jobs<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 94949755<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned