Night Shift Jobs in Kuwait

<p>POSITION SUMMARY Ensure staff is working together as a team. Inspect grooming and attire of staff and rectify any deficiencies. Communicate with guests, other employees, or departments to ensure guest needs are met. Respond to and try to fulfill any special banquet event arrangements. Set up banquet area/room, ensuring cleanliness and proper set up of furniture/equipment. Inspect and maintain table set-ups for cleanliness, neatness and agreement with group requirements and company standards, and resolve any problems. Document pertinent information in appropriate department logbook. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Develop and maintain positive working relationships with others, and support team to reach common goals. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language, and answer telephones using appropriate etiquette. Ensure adherence to quality expectations and standards. Read and visually verify information in a variety of formats (e.g., small print). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: At least 1 year of supervisory experience. License or Certification: None</p>

<p>POSITION SUMMARY Calculate figures for food inventories, orders, and costs. Maintain clear and organized records to ensure all reports and invoices are filed and stored properly. Post invoices using computer programs. Conduct inventory audits to determine inventory levels and needs. Complete requisition forms for inventory and supplies. Notify manager/supervisor of low stock levels. Verify and track received inventory and complete inventory reports and logs. Reconcile shipping invoices and receiving reports to ensure count accuracy. Receive, unload, and process deliveries. Refuse acceptance of damaged, unacceptable, or incorrect items. Troubleshoot vendor delivery issues and oversee return process. Adhere to food safety and handling policies and procedures across all food-related areas. Monitor PAR levels for all food items to ensure proper levels. Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Comply with quality assurance expectations and standards. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education : High school diploma or G.E.D. equivalent.<br>Related Work Experience : At least 1 year of related work experience.<br>Supervisory Experience : No supervisory experience.<br>License or Certification: None</p>

<p>POSITION SUMMARY Ensure staff is working together as a team. Inspect grooming and attire of staff and rectify any deficiencies. Communicate with guests, other employees, or departments to ensure guest needs are met. Respond to and try to fulfill any special banquet event arrangements. Set up banquet area/room, ensuring cleanliness and proper set up of furniture/equipment. Inspect and maintain table set-ups for cleanliness, neatness and agreement with group requirements and company standards, and resolve any problems. Document pertinent information in appropriate department logbook. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Develop and maintain positive working relationships with others, and support team to reach common goals. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language, and answer telephones using appropriate etiquette. Ensure adherence to quality expectations and standards. Read and visually verify information in a variety of formats (e.g., small print). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: At least 1 year of supervisory experience. License or Certification: None</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>To ensure a smooth, efficient, honest and accurate payment handling procedures for customers. The job roles include counting cash money, handling credit/debit card payments, and the sales of gift cards and Telly cards at the POS terminal. Guiding customers to delivery area/handing-over purchases to customers with highlighting refund &amp; exchange policy.</p><br> <br><br>Job Responsibilities <br><p><strong>Customer Service</strong></p><br> <ul> <li>Acknowledges customers with greeting and smiling</li> <li>Being constantly presentable, pleasant and friendly</li> <li>Identifies &amp; fulfils customer needs</li> <li>Ensures all customers are treated equally with respect</li> <li>Assists customers with packing when necessary/guides customer to delivery area</li> <li>Takes extra care in handling customers’ purchases</li> <li>Provides customers with accurate information</li> <li>Ensures customer’s info. updated and offers forwarding invoices via email</li> <li>Explains return &amp; exchange policy</li> </ul> <p><strong>Sales</strong></p><br> <ul> <li>Obtains excellent and updated knowledge of all products &amp; services</li> <li>Being aware of all in-store promotions; discounts, credit, coupons and etc…</li> <li>Promotes gift cards with focus on customer benefits</li> <li>Promotes warranty programs highlighting its benefits to customers (if applicable)</li> <li>Promotes Telly cards explaining features, options and benefits</li> </ul> <p><strong>Operations</strong></p><br> <ul> <li>Expedites customer payments effectively in an efficient manner</li> <li>Applies all POS procedures as instructed by store management.</li> <li>Maintains cash desk / packing area always clean and tidy</li> <li>Follows organizational rules and regulations / Policy &amp; Procedures</li> <li>Follows company’s safety and security procedures</li> <li>Handles cash/credit payments and accurately counts customers’ money</li> <li>Counts and balances cash, credit slips, vouchers and coupons with total sales transactions at the end of the shift</li> <li>Masters computer applications in finalizing customers’ payments</li> </ul> <br><br>Candidate Requirements <br><ul> <li>Overall 1+ years of experience</li> <li>Good English language</li> <li>Good communication skills</li> </ul> <br><br>Education <br>Bachelor’s Degree<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Patrol all areas of the property; assist guests with room access. Monitor Closed Circuit Televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all Security/Loss Prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a Loss Prevention shift summary/daily activity report. Maintain confidentiality of all Security/Loss Prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties. Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely. Develop and maintain positive working relationships with others; support team to reach common goals. Comply with quality assurance expectations and standards. Stand, sit, or walk for an extended period of time. In addition, some states may have additional licensing/registration requirements to be considered for this position. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Move at a speed required to respond to work situations (e.g., run, walk, jog). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: High school diploma or G.E.D. equivalent.</p><p>Related Work Experience: No related work experience.</p><p>Supervisory Experience: No supervisory experience.</p><p>License or Certification: None</p><p></p></section>

<p><h4>Essential duties and responsibilities:</h4> <p>Responsible for executing supply functions in the following areas: receiving, inspecting, inventory, loading/unloading, segregating, storing, issuing, delivering and turn-in organizational and installation supplies and equipment.</p> <p>Maintains and oversees accountability records.</p> <p>Conducts inventory briefings.</p> <p>Maintains files in accordance with the Army Records Information Management System.</p> <p>Researches and resolves more complex property book/supply system related discrepancies.</p> <p>Operates a variety of software programs tailored specifically to manage logistical functions, such as procurement, inventory management, and other supply chain planning and management systems.</p> <p>Assists units with merging/splitting and transferring of property books, augments cyclic and sensitive item inventories per regulation, and assists units in acquiring and expediting supplies from approved sources.</p> <p>Ensures strict compliance with safety practices and supports the safety policies and procedures.</p> <p>Instills a safety-first mentality within respective work areas and a culture that achieves low accident rates and minimal lost-time injuries.</p> <p>Adheres to ISO policies, procedures, and work instructions in support of the quality management system.</p> <p>Performs other related duties as assigned or directed.</p> <h4>Minimum requirements:</h4> <ul> <li>Five years experience as a logistician in property book or supply.</li> <li>High school diploma or equivalent.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain secret clearance.</li> <li>Must have a valid driver's license.</li> <li>Must have a passport that is valid for at least one year.</li> <li>Must be able to obtain and maintain Kuwait work permit/resident visa.</li> <li>Thorough understanding and knowledge of inventory management required.</li> <li>Knowledge of U.S. Army inventory management accounting systems.</li> <li>Must be able to perform several tasks at one time, keep detailed records, and simultaneously manage several projects in a fast-paced environment.</li> <li>Must be able to handle unforeseen issues, such as delivery problems, and adjust plans as needed to resolve the issues.</li> <li>Ability to work effectively with employees and management of all levels (including multinational staff, superiors, and ranking military officers).</li> <li>Ability to prioritize responsibilities to accommodate a demanding workload.</li> <li>Attention to detail with a high degree of accuracy is required.</li> <li>Intermediate proficiency in Word, Excel, and Outlook applications is required.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Currently working in Kuwait with valid and transferable visa.</li> <li>US Army MOS 92A or 92Y preferred.</li> <li>Two years supervisory skills or higher is preferred.</li> <li>Experience operating Repair Data software solution and other commercial and DOD software programs tailored specifically to manage logistical functions, such as procurement, inventory management, and other supply chain planning and management systems.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the company and our customer for deployments.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential duties and responsibilities:</h4> <p>Responsible for executing supply functions in the following areas: receiving, inspecting, inventory, loading/unloading, segregating, storing, issuing, delivering, and turn-in organizational and installation supplies and equipment.<br> Maintains and oversees accountability records.<br> Conducts inventory briefings.<br> Maintains files in accordance with the Army Records Information Management System.<br> Researches and resolves more complex property book/supply system related discrepancies.<br> Operates a variety of software programs tailored specifically to manage logistical functions, such as procurement, inventory management, and other supply chain planning and management systems.<br> Assists units with merging/splitting and transferring of property books, augments cyclic and sensitive item inventories per regulation, and assists units in acquiring and expediting supplies from approved sources.<br> Ensures strict compliance with safety practices and supports the safety policies and procedures.<br> Instills a safety-first mentality within respective work areas and a culture that achieves low accident rates and minimal lost-time injuries.<br> Adheres to ISO policies, procedures, and work instructions in support of the quality management system.<br> Performs other related duties as assigned or directed.</p> <h4>Minimum requirements:</h4> <ul> <li>Five years experience as a logistician in property book or supply.</li> <li>High school diploma or equivalent.</li> <li>Must have an active Secret US government clearance. Note: US citizenship is required to obtain secret clearance.</li> <li>Must have a valid driver's license.</li> <li>Must have a passport that is valid for at least one year.</li> <li>Must be able to obtain and maintain Kuwait work permit/resident visa.</li> <li>Thorough understanding and knowledge of inventory management required.</li> <li>Knowledge of U.S. Army inventory management accounting systems.</li> <li>Must be able to perform several tasks at one time, keep detailed records, and simultaneously manage several projects in a fast-paced environment.</li> <li>Must be able to handle unforeseen issues, such as delivery problems, and adjust plans as needed to resolve the issues.</li> <li>Ability to work effectively with employees and management of all levels (including multinational staff, superiors, and ranking military officers).</li> <li>Ability to prioritize responsibilities to accommodate a demanding workload.</li> <li>Attention to detail with a high degree of accuracy is required.</li> <li>Intermediate proficiency in Word, Excel, and Outlook applications is required.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Currently working in Kuwait with valid and transferrable visa.</li> <li>US Army MOS 92A or 92Y preferred.</li> <li>Two years supervisory skills or higher is preferred.</li> <li>Experience operating Repair Data software solution and other commercial and DOD software programs tailored specifically to manage logistical functions, such as procurement, inventory management, and other supply chain planning and management systems.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployments.<br> Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential duties and responsibilities:</h4> <p>Responsible for executing supply functions in the following areas: receiving, inspecting, inventory, loading/unloading, segregating, storing, issuing, delivering and turn-in organizational and installation supplies and equipment.<br> Maintains and oversees accountability records.<br> Conducts inventory briefings.<br> Maintains files in accordance with the Army Records Information Management System.<br> Researches and resolves more complex property book / supply system related discrepancies.<br> Operates a variety of software programs tailored specifically to manage logistical functions, such as procurement, inventory management, and other supply chain planning and management systems.<br> Assists units with merging / splitting and transferring of property books, augments cyclic and sensitive item inventories per regulation and assists units in acquiring and expediting supplies from approved sources.<br> Ensures strict compliance with safety practices and supports the safety policies and procedures.<br> Instills a safety-first mentality within respective work areas and a culture that achieves low accident rates and minimal lost-time injuries.<br> Adheres to ISO policies, procedures, and work instructions in support of quality management system.<br> Performs other related duties as assigned or directed.</p> <h4>Minimum requirements:</h4> <ul> <li>Five years experience as a logistician in property book or supply</li> <li>High school diploma or equivalent</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain secret clearance.</li> <li>Must have a valid driver's license</li> <li>Must have a passport that is valid for at least one year</li> <li>Must be able to obtain and maintain Kuwait work permit/resident visa</li> <li>Thorough understanding and knowledge of inventory management required</li> <li>Knowledge of U.S. Army inventory management accounting systems</li> <li>Must be able to perform several tasks at one time, keep detailed records, and simultaneously manage several projects in a fast-paced environment</li> <li>Must be able to handle unforeseen issues, such as delivery problems, and adjust plans as needed to resolve the issues</li> <li>Ability to work effectively with employees and management of all levels (including multinational staff, superiors and ranking military officers)</li> <li>Ability to prioritize responsibilities to accommodate a demanding workload</li> <li>Attention to detail with a high degree of accuracy is required</li> <li>Intermediate proficiency in Word, Excel and Outlook applications is required</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Currently working in Kuwait with valid and transferable visa</li> <li>US Army MOS 92A or 92Y preferred</li> <li>Two years supervisory skills or higher is preferred</li> <li>Experience operating Repair Data software solution and other commercial and DOD software programs tailored specifically to manage logistical functions, such as procurement, inventory management, and other supply chain planning and management systems</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift</li> <li>Requires the flexibility to bend/stoop, squat repetitively during shift</li> <li>Requires the ability to regularly kneel repetitively for shift</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift</li> <li>Requires the ability to walk extensively throughout the plant during shift</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployments.<br> Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness.</p><p>Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform. Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma</li><li>Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: I Level &amp; O Level Tire &amp; Wheel certification Hydraulic Contamination certification Collateral Duty Inspector (CDI) qualification Corrosion Prevention and Control and Aircraft Paint qualification I Level Battery Maintenance certification</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.</li><li>Must have a working knowledge of first aid procedures to be used in an emergency.</li><li>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</li><li>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</li><li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li><li>Must have a valid U.S. Driver s License.</li><li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.</li><li>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.</li><li>Have a strong knowledge base of intermediate level maintenance business practices and procedures</li><li>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions.</li><li>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O level, I level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs.</li><li>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance.</li><li>Must have an in-depth knowledge of applicable technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.</li><li>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program.</li><li>Must be willing and able to work with hazardous materials and conduct specialty on-the-job training.</li><li>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.</li><li>Must have a proven ability to work independently with minimal direction.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: • Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. • Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. • Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins. • Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. • Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions • Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components • Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. • Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data • Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. • Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control • Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. • Performs applicable “O” and “I” level battery maintenance functions as required per applicable maintenance manuals. • Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR • Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems. • Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. • Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ • Conducts off station maintenance when required. • When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: - High School Diploma - Must be able to obtain/maintain the following required certifications/qualifications: - Aviation Gas Free Engineering (AVGFE) certification - Auxiliary Power Unit (APU) run qualification -“I” Level Battery Maintenance certification - Applicable Support Equipment licensing - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification - Corrosion Prevention and Control qualification - Confined Space Entry certification Experience: • Four years’ maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred.. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: • Must be United States (U.S.) citizen, be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must be able to obtain and maintain at a Secret Security Clearance. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” and “I” level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed. • Must have an in-depth knowledge of aircraft technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the C-130J maintenance department. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in around 65 countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.</p><br><br>Job Description<br><p><strong>WHAT’S ON YOUR PLATE?</strong></p><br><ul><li>Inbound &amp; Putaway: Receive GRNs against POs, check quantity/quality/expiry/temperature, label and put away using FIFO/FEFO and slotting rules.</li><li>Picking &amp; Packing: Pick waves for store replenishment and customer orders using RF scanners; pack with correct dunnage and cold-chain handling.</li><li>Dispatch &amp; Handover: Stage orders by route/store, load vehicles, hand over to last-mile teams with full documentation (STNs/DOs).</li><li>Inventory Control: Daily cycle counts, weekly reconciliations, investigate variances, manage near-expiry, damages, RTVs.</li><li>Quality &amp; Compliance: Maintain hygiene, HACCP/ISO 22000 checklists, temperature logs, pest control records, PPE, and 5S standards.</li><li>Systems &amp; Reporting: Operate WMS/RF devices, update statuses in real time; prepare simple shift reports (receipts, pick lines, shrink).</li><li>Cross-Functional: Coordinate with Demand planning, Ops, and Transport on delivery schedules, priorities, and exceptions.</li></ul><p><strong>KPIs</strong></p><br><ul><li>Receiving accuracy ≥99%; Pick accuracy ≥99.5%</li><li>On-time dispatch (OTD/OTIF) ≥98%</li><li>Inventory variance ≤0.2%, shrink % within target</li><li>Hygiene &amp; temperature log 100% compliance</li></ul><br>Qualifications<br><p><strong>WHAT DID WE ORDER?</strong></p><br><ul><li>1–3 years in warehouse/DC (FMCG retail, e-commerce, or darkstore preferred).</li><li>Working knowledge of FIFO/FEFO, batch/expiry control, and cold-chain handling.</li><li>Comfortable with WMS/RF scanners; basic Excel/Google Sheets.</li><li>Detail-oriented, fast, and reliable under time pressure; English required..</li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>WHAT’S ON YOUR PLATE?</strong></p><br><br><ul><li>Inbound &amp; Putaway: Receive GRNs against POs, check quantity/quality/expiry/temperature, label and put away using FIFO/FEFO and slotting rules.</li><li>Picking &amp; Packing: Pick waves for store replenishment and customer orders using RF scanners; pack with correct dunnage and cold-chain handling.</li><li>Dispatch &amp; Handover: Stage orders by route/store, load vehicles, hand over to last-mile teams with full documentation (STNs/DOs).</li><li>Inventory Control: Daily cycle counts, weekly reconciliations, investigate variances, manage near-expiry, damages, RTVs.</li><li>Quality &amp; Compliance: Maintain hygiene, HACCP/ISO 22000 checklists, temperature logs, pest control records, PPE, and 5S standards.</li><li>Systems &amp; Reporting: Operate WMS/RF devices, update statuses in real time; prepare simple shift reports (receipts, pick lines, shrink).</li><li>Cross-Functional: Coordinate with Demand planning, Ops, and Transport on delivery schedules, priorities, and exceptions.</li></ul><p><strong>KPIs</strong></p><br><br><ul><li>Receiving accuracy ≥99%; Pick accuracy ≥99.5%</li><li>On-time dispatch (OTD/OTIF) ≥98%</li><li>Inventory variance ≤0.2%, shrink % within target</li><li>Hygiene &amp; temperature log 100% compliance</li></ul><br>What you need to be successful<br><p><strong>WHAT DID WE ORDER?</strong></p><br><br><ul><li>1–3 years in warehouse/DC (FMCG retail, e-commerce, or darkstore preferred).</li><li>Working knowledge of FIFO/FEFO, batch/expiry control, and cold-chain handling.</li><li>Comfortable with WMS/RF scanners; basic Excel/Google Sheets.</li><li>Detail-oriented, fast, and reliable under time pressure; English required..</li></ul><br>Who we are<br><p>Talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in around 65 countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><strong>About </strong></span><span><strong>Calo</strong></span><p><span>Launched in Bahrain in November 2019, Calo is on a mission to make healthy easy. We provide better, faster, and more accessible ways to enjoy nutritious food through technology-driven kitchens. CALO operates high-performance cloud kitchens focused on consistency, speed, and quality, delivering healthy meals at scale.</span></p><br><br><span><strong>Role Overview</strong></span><p><span>We are looking for a Chef De Partie to lead CALO’s on-demand Kitchen operation.</span><br><span>In this role, the CDP will be fully responsible for the kitchen ALACARTE during their shift and will oversee the entire cloud kitchen operation. This includes food production, staff supervision, inventory control, quality standards, and operational efficiency.</span></p><br><br><p><span>This is a hands-on leadership role in a single-shift, high-volume, fast-paced cloud kitchen environment, similar to heavy à la carte restaurant operations, but focused on delivering healthy food and achieving excellence in execution and delivery. The Chef De Partie will act as the main point of responsibility on-site, ensuring the kitchen performs at the highest standards at all times.</span></p><br><br><span><strong>Main Responsibilities</strong></span><p><span>• Take full ownership of the cloud kitchen operations during the assigned shift </span><br><span>• Run the kitchen independently and ensure smooth end-to-end operations </span><br><span>• Lead, supervise, and manage all kitchen staff on shift </span><br><span>• Ensure timely preparation and dispatch of orders while maintaining Calo’s quality standards </span><br><span>• Execute menu items consistently according to approved recipes, taste, presentation, and nutritional guidelines </span><br><span>• Plan daily production and workflow to meet operational demand </span><br><span>• Monitor food quality, freshness, portioning, and waste control </span><br><span>• Manage inventory, ordering, stock rotation, and storage </span><br><span>• Enforce strict compliance with food safety, hygiene, and sanitation regulations </span><br><span>• Train, coach, and evaluate kitchen staff performance </span><br><span>• Communicate clearly with team members and management (Central Kitchen)</span><br><span>• Resolve operational issues proactively and take control of challenging situations </span><br><span>• Maintain a clean, organized, and efficient kitchen environment </span><br><span>• Lead by example with professionalism, discipline, and accountability</span></p><br><br><span><strong>Ideal Candidate</strong></span><span><strong>Qualifications</strong></span><p><span>• Proven experience as a Chef De Partie (CDP) </span><br><span>• Minimum of 5 years’ experience in hospitality within dine-in, à la carte, casual dining, or high-volume restaurant kitchens </span><br><span>• Strong background in heavy-pace à la carte operations </span><br><span>• Culinary degree or equivalent professional kitchen experience </span><br><span>• Previous experience running a kitchen or leading shifts independently </span><br><span>• Cloud kitchen or production kitchen experience is an advantage </span><br><span>• Willing to relocate to Kuwait </span><br><span>• Proficient in spoken and written English</span></p><br><br><span><strong>Knowledge &amp; Competency</strong></span><p><span>• Strong leadership with the ability to run kitchen operations independently </span><br><span>• Excellent kitchen management and organizational skills </span><br><span>• Ability to handle high-volume production under pressure </span><br><span>• Skilled in staff scheduling, task delegation, and performance monitoring </span><br><span>• Strong understanding of healthy food concepts and modern kitchen practices </span><br><span>• Cost awareness, inventory control, and waste reduction knowledge </span><br><span>• Ability to maintain consistency, speed, and quality simultaneously</span></p><br><br><span><strong>Personality</strong></span><p><span>• Confident leader with a strong sense of ownership </span><br><span>• Calm, decisive, and solutions-oriented under pressure </span><br><span>• Clear and effective communicator </span><br><span>• Professional, disciplined, and detail-oriented </span><br><span>• Supportive leader who motivates teams with empathy and fairness </span><br><span>• Customer-focused mindset, even within a delivery-first operation</span></p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Do you enjoy working with cutting-edge energy equipment?</b></p><br><p><b>Do you love collaborating with teams to solve complex problems?</b></p><br><p><b>Join our innovating Field Services team</b></p><br><p>Our Oilfield Services Team is assembling and testing the latest products of oilfield equipment, which is beating heart of our work. We collaborate with our development teams in science, mechanical and electrical engineering, physics, geoscience, to develop innovative drilling tools.</p><br><p><b>Partner with the best</b></p><br><p>The responsibility is to supervise drilling of oil &amp; gas wells across India in different drilling environments.</p><br><p><b>You will be responsible for:</b></p><br><ul><li>Developing and demonstrating proficiency in the skill profile required for the delivery of assigned Directional Systems services at the well site.</li><li>Completing successful advanced technical training and assigned well site development programs.</li><li>Conducting all business activities in accordance with Baker Hughes HSE policies ,Legal Compliance requirements and Baker Hughes Core Values.</li><li>Maintaining frequent intra-organizational and external customer contacts with a high degree of professionalism</li></ul><p><b>Fuel your passion</b></p><br><p><b>To be successful in this role you will:</b></p><br><ul><li>Have 3 years of experience in Directional Drilling</li><li>Be a Petroleum or Mechanical engineering graduate</li><li>Have an Industry experience and product-line training required.</li><li>Have a basic knowledge of MWD</li><li>Have a good mechanical aptitude.</li></ul><p><b>Work in a way that works for you</b></p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p><br><p>This role is a shift based working pattern. Please talk to us about the specific working patterns available when you apply.</p><br><p><b>Working with us</b></p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.</p><br><p><b>Working for you</b></p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><br><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits</li></ul>The Baker Hughes internal title for this role is: FIELD SPEC IV - LWD/DD </div>

<p>Job Purpose The Data Center Mechanical Engineer owns the mechanical and cooling infrastructure of the data center at engineering level, from the central cooling plant through to the data hall cooling environment. The role is responsible for mechanical maintenance strategy, system reliability, operational procedures, environmental performance, vendor management, safety compliance, spare-parts planning, and emergency response. The Mechanical Engineer directs the Mechanical Manning Technicians, authorizes equipment changeovers and critical maintenance activities, approves mechanical procedures, and acts as the mechanical technical authority during incidents and operational escalations.</p><p>Key Responsibilities and Areas of Ownership</p><ul><li>Take engineering ownership of the data center mechanical and cooling infrastructure, including chillers, cooling towers, chilled-water pumps, condenser-water pumps, heat exchangers, CRAH units, CRAC units, AHUs, ventilation systems, fans, filters, coils, valves, actuators, piping systems, and associated controls.</li><li>Manage the operation, reliability, and performance of chilled-water and precision-cooling systems serving the data halls and supporting areas.</li><li>Own mechanical equipment operating procedures, changeover procedures, start-up and shutdown sequences, and equipment rotation plans.</li><li>Authorize, lead, and supervise critical mechanical activities, including chiller changeovers, pump changeovers, cooling-tower changeovers, isolation activities, system draining, system filling, and restoration of equipment to service.</li><li>Monitor and maintain data hall environmental conditions, including temperature, humidity, airflow, differential pressure, cooling capacity, and equipment loading.</li><li>Review chilled-water supply and return temperatures, water flow, system pressure, differential pressure, valve positions, and system delta-T to identify performance issues and operational risks.</li><li>Manage cooling redundancy and capacity to ensure sufficient cooling remains available during maintenance, equipment failure, testing, or abnormal operating conditions.</li><li>Own the mechanical safety program, including Lockout/Tagout, Permit to Work, risk assessments, safe isolation, refrigerant safety, chemical-handling controls, and compliance with HSE requirements.</li><li>Develop and manage the annual mechanical Planned Preventive Maintenance program in accordance with OEM recommendations, equipment criticality, maintenance history, and operational requirements.</li><li>Prepare, review, approve, and maintain mechanical Standard Operating Procedures, Methods of Procedure, Emergency Operating Procedures, maintenance instructions, risk assessments, and equipment changeover procedures.</li><li>Ensure that all mechanical maintenance activities are planned around available cooling redundancy and executed without compromising data center availability.</li><li>Own vendor coordination for mechanical maintenance activities and supervise OEM major services, equipment overhauls, repairs, inspections, and specialist testing.</li><li>Review vendor method statements, risk assessments, service reports, test results, recommendations, and corrective-action requirements.</li><li>Manage critical spare-parts and inventory planning for chillers, pumps, cooling towers, CRAH and CRAC units, valves, actuators, sensors, filters, belts, bearings, motors, VFDs, and other mechanical systems.</li><li>Analyze cooling-system performance, equipment efficiency, energy consumption, operating trends, alarm history, temperature profiles, water-flow conditions, and equipment loading.</li><li>Identify and implement opportunities to improve cooling efficiency, airflow management, chilled-water performance, equipment sequencing, and overall energy performance without reducing system resilience.</li><li>Investigate mechanical faults, high-temperature conditions, leaks, abnormal vibration, low-flow conditions, low delta-T, equipment trips, control failures, and recurring alarms.</li><li>Lead root cause analysis for mechanical incidents and equipment failures and implement corrective and preventive actions.</li><li>Direct, develop, and train Mechanical Manning Technicians in operational procedures, inspections, first-line maintenance, alarm response, safe isolation, and incident escalation.</li><li>Review technician shift logs, inspection checklists, operating readings, alarm reports, and job-card closure records.</li><li>Support testing and commissioning activities, integrated systems testing, functional performance testing, equipment acceptance, redundancy verification, and operational-readiness activities.</li><li>Support predictive and condition-based maintenance programs, including vibration analysis, oil analysis, refrigerant checks, water and coolant sampling, thermal inspections, leak detection, and equipment-performance trending.</li><li>Manage liquid-cooling systems, Cooling Distribution Units, coolant loops, leak-detection systems, valves, pumps, and associated controls where installed.</li><li>Coordinate water-treatment activities, water-quality monitoring, chemical dosing, sampling, and corrective actions for chilled-water, condenser-water, and liquid-cooling systems where applicable.</li><li>Support WTP, STP, plumbing, drainage, and mechanical fire-protection systems where included within the data center operational scope.</li><li>Coordinate with electrical, BMS, IT, operations, HSE, vendors, and management teams during planned maintenance, incidents, testing, and emergency situations.</li><li>Maintain accurate mechanical documentation, asset records, maintenance reports, operating procedures, equipment histories, incident reports, testing records, and technical drawings.</li><li>Act as the mechanical technical authority during cooling incidents and operational escalations on a 24/7 on-call basis.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Engineer Level</li><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum of 5 years of mechanical, HVAC, cooling-plant, or critical-facility operations and maintenance experience.</li><li>At least 2 years of experience in a data center or another critical facility where loss of cooling could affect essential operations.</li><li>Demonstrated engineering-level experience with chilled-water systems, precision cooling, or critical HVAC systems.</li><li>Practical knowledge of chillers, pumps, cooling towers, heat exchangers, CRAH units, CRAC units, AHUs, valves, actuators, VFDs, and mechanical controls.</li><li>Experience in managing cooling redundancy, equipment capacity, environmental conditions, and critical maintenance activities in a live operational environment.</li><li>Demonstrated ownership of mechanical maintenance planning, technical procedure writing, incident response, vendor management, and spare-parts planning.</li><li>Experience preparing or approving SOPs, MOPs, EOPs, risk assessments, isolation plans, and maintenance procedures.</li><li>Ability to read and interpret P&amp;IDs, mechanical drawings, equipment schematics, sequence-of-operation documents, control diagrams, and OEM technical manuals.</li><li>Working knowledge of BMS or BAS platforms, mechanical alarms, equipment trends, sensors, control sequences, and environmental monitoring.</li><li>Good understanding of chilled-water temperatures, flow, pressure, differential pressure, delta-T, heat transfer, airflow, humidity, and cooling-capacity principles.</li><li>Experience with root cause analysis, corrective-action planning, and technical incident reporting.</li><li>Familiarity with testing, commissioning, integrated systems testing, and mechanical-system operational-readiness activities.</li><li>Fluent written and spoken English with strong technical reporting and communication skills.</li></ul><p>Other Requirements</p><ul><li>The role is fully on-site within an operational data center environment.</li><li>Availability for 24/7 on-call support is required.</li><li>The employee must be available to support planned shutdowns, emergency maintenance, testing activities, shift coverage, weekends, nights, and public holidays when operationally required.</li><li>The employee must comply with all company, client, data center, HSE, Permit to Work, LOTO, security, and access-control requirements.</li><li>The employee must be able to coordinate effectively with technicians, contractors, OEM vendors, operations teams, IT teams, and other engineering disciplines.</li></ul>

<p>We are hiring experienced Asst Floor Manager for a reputed restaurant group in Kuwait . Key Responsibilities Assist the Floor Manager in overseeing daily restaurant floor operations Supervise front-of-house staff including waiters, hosts, and service crew Ensure excellent customer service and guest satisfaction at all times Monitor staff performance, grooming, attendance, and discipline Handle guest complaints and resolve issues professionally Coordinate with kitchen and bar teams for smooth service flow Ensure proper table setup, cleanliness, and hygiene standards Support staff training, scheduling, and shift coordination Assist in achieving restaurant sales and operational targets Monitor inventory of service items and report shortages Ensure compliance with company policies, SOPs, and food safety standards Prepare shift reports and support management with daily operations Benefits: Attractive Salary Accommodation &amp; Transportation Provided Job Location : Kuwait</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma or Degree in Hospitality Management or related field preferred</p><p>3 5 years of experience in restaurant or hospitality operations</p><p>Previous supervisory experience in restaurants or caf s preferred</p><p>Strong leadership and team management skills</p><p>Excellent communication and customer service abilities</p><p>Ability to work under pressure in a fast-paced environment</p><p>Good problem-solving and conflict-resolution skills</p><p>Familiarity with POS systems and restaurant operations</p>

<p><h4>Position summary</h4> <p>Provide massage services to guests using props and/or products. Provide body treatments to guests using body scrubs, wraps, and/or hydrotherapy. Assess guest needs and inquire about contraindications (e.g., allergies, high blood pressure, and pregnancy) before beginning service. Keep up to date with current techniques and modalities related to their field of work. Escort guests to and from treatment rooms. Arrange workstation, treatment room, and/or drapes. Frequently check with guest to promote comfort, safety, and security throughout service. Promote and sell spa/salon services including retail offerings related to the spa. Clean, maintain, and sterilize tools. Maintain cleanliness of workstation and/or treatment room throughout shift, dispose of trash and dirty linens, and secure supplies and equipment at the end of each shift. Monitor and stick to time schedule throughout the day. Handle inappropriate guest behavior by following Marriott International standard operating procedures for inappropriate conduct for guests and therapists, leading up to and including stopping a treatment or service and informing supervisor/manager. Maintain current skills and licensure in service area as per regional requirements.</p> <p>Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; make sure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; thank</p><p></p>

<p><h4>Position summary</h4> <p>Provide massage services to guests using props and/or products. Provide body treatments to guests using body scrubs, wraps, and/or hydrotherapy. Assess guest needs and inquire about contraindications (e.g., allergies, high blood pressure, and pregnancy) before beginning service. Keep up to date with current techniques and modalities related to their field of work.</p> <p>Escort guests to and from treatment rooms. Arrange workstation, treatment room, and/or drapes. Frequently check with guest to promote comfort, safety, and security throughout service. Promote and sell spa/salon services including retail offerings related to the spa. Clean, maintain, and sterilize tools. Maintain cleanliness of workstation and/or treatment room throughout shift, dispose of trash and dirty linens, and secure supplies and equipment at the end of each shift.</p> <p>Monitor and stick to time schedule throughout the day. Handle inappropriate guest behavior by following Marriott International standard operating procedures for inappropriate conduct for guests and therapists, leading up to and including stopping a treatment or service and informing supervisor/manager. Maintain current skills and licensure in service area as per regional requirements.</p> <p>Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; make sure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs;</p><p></p>

<p>We are hiring experienced Sr Hostess for a reputed restaurant group in Kuwait. Key Responsibilities Greet, acknowledge, seat and farewell guests professionally. Recognize VIP and regular guests and coordinate personalized service. Manage reservations, special requests, guest profiles and reservation notes. Manage seating plans, waitlists, queues and table availability. Coordinate table allocation with Floor Manager and service team. Handle guest inquiries, complaints and service recovery. Maintain guest interaction and complaint records. Guide and coach junior hostesses and FOH staff. Allocate host-desk duties and monitor performance. Coordinate guest information with managers and service staff. Maintain host desk, entrance and guest areas. Handle telephone calls and reservation inquiries. Support promotions, guest loyalty and revenue objectives. Prepare reports on guest feedback, VIP activity and service trends. Complete shift handovers and ensure the host area is ready for the next shift</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 2 3 years in restaurant hosting, guest relations, hospitality or similar customer-facing role. Senior/supervisory experience preferred. Diploma or Bachelor s degree in Hospitality Management, Business Administration or related field preferred. Experience with reservations, waitlists, VIP guests, complaints and service recovery. Sales, loyalty activities or special-event experience is an advantage.</p> <p>Job requirements Minimum height: 165 cm Fit appearance and professional grooming. Fluent Arabic &amp; English; additional languages advantageous. Confident, presentable and warm personality. Excellent guest-relations and interpersonal skills. Strong organization and reservation-management skills. Good complaint handling and problem-solving ability. Leadership skills to guide junior staff. Comfortable with reservation systems, tablets, QR feedback tools and MS Office.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Control Room Engineer</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Generation &amp; Energy</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Monitor and control 50 MW Gas Turbine Unit operations from the control room.<br></li><li>Ensure safe, efficient and uninterrupted power generation.<br></li><li>Monitor plant parameters using DCS/SCADA systems.<br></li><li>Coordinate start-up, shutdown and emergency operations.<br></li><li>Identify operational abnormalities and initiate corrective actions.<br></li><li>Maintain operational logs and prepare shift reports.<br></li><li>Coordinate with maintenance teams during planned and breakdown maintenance.<br></li><li>Ensure compliance with plant safety and operational procedures.<br></li></ul>Required Skills<br><ul><li>Gas Turbine Unit Operation (50 MW) – Strong operational knowledge.<br></li><li>Control Room Operations – Real-time monitoring and control.<br></li><li>DCS/SCADA Systems – Plant monitoring and diagnostics.<br></li><li>Power Plant Troubleshooting – Fault identification and corrective action.<br></li><li>Safety &amp; Operational Compliance – Adherence to HSE standards.<br></li></ul>Preferred Skills<br><ul><li>Combined Cycle Power Plant experience.<br></li><li>Leadership in shift operations.<br></li><li>Root Cause Analysis (RCA).<br></li></ul>Work Experience Requirements<br><p>Minimum <b>10 years</b> of experience in Gas Turbine Power Plant operations with hands-on experience operating a <b>50 MW Gas Turbine Unit</b> from the control room. Experience in large-scale thermal or combined cycle power plants is preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.E.<br></li><li><b>Preferred:</b> Bachelor's in Mechanical/Electrical/Power Engineering<br></li><li><b>Additional Certifications:</b> Power Plant Operations, HSE Certification (if available)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>